ŝ35Ş
Sharpness
OSD (On Screen Display) information
ƈIdle mode : If you select the [LCD Save] and the
camera isn't operated during the
specified time(about 30 SEC.), the
camera power will be idle (LCD monitor :
OFF, Camera status lamp : Blinking)
automatically.
- To use the camera again, press any of the
camera buttons except the power button.
- If there is no operation during the specified time, the camera power will be
turned off automatically to save battery life. Refer to page 56 for more
information about the auto power off function.
OSD INFORMATION
Full
Basic
LCD Save
[ Full information mode ] [ Basic information mode ]
ƈYou can adjust the sharpness of the picture you
want to take. You cannot check the sharpness effect
on the LCD monitor before you take a picture,
because this function is applied only when the
captured image is stored on the memory.
Sub menu Icon Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized. The edges
will appear sharp, but noise may occur in the
recorded image.
Vivid
Normal
Soft
[ PROGRAM mode ]
SHARPNESS
Soft
Normal
Vivid
ƈIn any mode with the exception of VOICE RECORDING mode, you can check
the recording status in the LCD monitor.