Solving Common Problems
ENGLISH
Before contacting the
They may save you the time and expense of an unnecessary call.
Problem | Explanation/Solution |
The air conditioner does not operate at all
◆Check that the breaker used for the air conditioner is switched on.
◆Check that the operation indicator on the indoor unit is on;
if necessary press the 
(On/Off) button on the remote control.
◆Check whether the Timer indicator on the indoor unit is switched on. If so:
-Wait until the
-Cancel the timer (see pages 18 and 19 for further details)
The air conditioner does not operate with the remote control
◆Check that there are no obstacles between you and the indoor unit.
◆Check the remote control batteries.
◆Check that you are close enough to the indoor unit (seven meters/yards or less).
No beep is heard when you press
the 
(On/Off) on the remote control
◆Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit.
◆Replace the remote control batteries if necessary.
The air conditioner does not cool ◆ Check that the correct operating mode has been selected (AUTO, COOL).
◆The room temperature may be too low.
◆Dust may be blocking the air filter guard; refer to page 24 for cleaning instructions.
◆Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change | ◆ Check that the operating mode is set to COOL or FAN ; | ||
when you press the | button | in the AUTO mode, the fan speed changes automatically and in the | |
|
| DRY mode, it is set to AUTO. | |
The air flow direction does |
| ◆ Check that the air conditioner has been switched on; | |
not change when you press the | if necessary, press the | (On/Off) button on the remote control. | |
button |
|
|
|
The timer is not correctly triggered | ◆ Check that the timer has been programmed correctly; | ||
|
| see pages 18 and 19. |
|
Odour is permeated in the room | ◆ Air the room. |
| |
during air conditioning |
|
|
|
