Solving Common Problems
Before contacting the
Problem |
| Explanation/Solution |
|
| |
The air conditioner does not | ◆ Check that the breaker used for the air conditioner is switched on. | |
operate at all | ◆ Check that the 5 Way indicator on the indoor unit is on; | |
| if necessary press the | (On/Off) button on the remote control. |
◆Check whether the TIMER indicator on the indoor unit is switched on. If so:
-Wait until the
-Cancel the timer (see pages 16 and 17 for further details)
The air conditioner does not | ◆ Check that there are no obstacles between you and the indoor unit. |
operate with the remote control | ◆ Check the remote control batteries. |
| ◆ Check that you are close enough to the indoor unit (seven metres/ |
| yards or less). |
No beep is heard when you press | ◆ Check that you are pointing the remote control at the remote control | |
the | (On/Off) on the remote | sensor in the right of the indoor unit. |
control |
| ◆ Replace the remote control batteries if necessary. |
|
| |
The air conditioner does not cool | ◆ Check that the correct operating mode has been selected (AUTO, | |
|
| COOL). |
◆The room temperature may be too low.
◆Dust may be blocking the air filter guard; refer to page 20 for cleaning instructions.
◆Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change ◆ Check that the operating mode is set to COOL or FAN ; in the
when you press the FAN button AUTO mode, the fan speed changes automatically and in the DRY mode, it is set to AUTO.
The air flow direction does not ◆ Check that the air conditioner has been switched on; if necessary,
change when you press thepress the 
(On/Off) button on the remote control. SWING button
The timer is not correctly triggered ◆ Check that the timer has been programmed correctly; see pages 16 and 17.
Odours are permeated in the room ◆ Air the room. during air conditioning
ENGLISH
