Removing Excess Humidity

ENGLISH

If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.

1 If necessary, press the (On/Off) button.

Result: The air conditioner starts up in Cool mode with

Turbo fan speed.

The 5 Way indicator on the indoor unit lights up.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

It will start up normally after three minutes.

2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.

Result: The indoor unit beeps each time you press the MODE button.

The air conditioner runs in DRY mode. Note You can change modes at any time.

3To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the TEMPERATURE buttons:

-The temperature is adjusted by 1°C

-The indoor unit beeps

The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.

4To control the direction of the air flow, refer to page 15.

E-13