How to use OSD Menu
AGC FIX
LEVEL[01]
If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.
As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
| ❖ DNR | [OFF,LOW,MID,HIGH, USER(1~16)] |
You can configure the DNR (Digital Noise Reduction) related settings.
Reduces the noise on the screen.This is especially useful for a severely distorted screen.You can set the level if you set DNR to USER.
❖SHUTTER[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT]
The SHUTTER menu is used to set the fixed
You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high speed electronic shutter, which is mostly used for imaging a fast moving object.
The auto high speed electronic shutter operates as the fixed high speed shutter in a high contrast scene but automatically focuses the target if the iris opens fully in a low contrast scene like in ELC mode. When it gets brighter back, the mode will switch to the fixed high speed electronic shutter mode.
However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO
In external high speed electronic shutter (EXT) mode, you can select one of 8 modes from OFF through 1/100(PAL:1/120) to 1/10K for the high speed electronic shutter. It works as the high speed electronic shutter. You can select an option using SHUTTER(S0), SHUTTER(S1) and SHUTTER(S2) on the rear.
Connect each of the terminals to GND.See the below table for the operation.
| SHUTTER(S0) | SHUTTER(S1) | SHUTTER(S2) | |
OFF |
|
|
| |
(NTSC: 1/60, | OFF | OFF | OFF | |
PAL:1/50) |
|
|
| |
1/100 | ON | OFF | OFF | |
(PAL:1/120) | ||||
|
|
| ||
1/250 | OFF | ON | OFF | |
|
|
|
| |
1/500 | ON | ON | OFF | |
|
|
|
| |
1/1000 | OFF | OFF | ON | |
|
|
|
| |
1/2000 | ON | OFF | ON | |
|
|
|
| |
1/4000 | OFF | ON | ON | |
|
|
|
| |
1/10K | ON | ON | ON | |
|
|
|
|
Note :
–If the SHUTTER option is set to fixed electronic shutter or EXT mode, the
| ❖ FLICKERLESS | [OFF, ON] |
If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.
❖XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH]
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.