User Guide

When you put aside the cable of the camera instead of making a hole in the installation site, turn the lens to the end in a counter-clockwise direction and connect it to the cable guide as shown in the figure before placing it outside. (This is to prevent the inside cable from being short when the lens rotates, and you should remove some parts of the cable that may fall out of the case.)

5.Place the bracket ceiling so that the key image of the ceiling can be seen through the hole on the main body of the camera as shown in the figure, and turn it until you hear the locking sound.

6.Adjust the lens as desired, by rotating the lens up and down or right and left.

7.Assemble the Cover Dome into the camera so that the lens can be seen through the transparent part.

When you turn the Cover Dome, the lens installed inside also rotates. But you must separate the Cover Dome to adjust the lens up and down.

8

Page 10
Image 10
Samsung SCC-B5223BP, SCC-B5223P manual User Guide