How to use OSD Menu
If you press the SETUP switch in item 1 or 2 of the MASK AREA menu, you will see a menu where you can specify an area to MASK.
MASK AREA
<SIZE> <LOCATION>
|
You can specify MASK 1 and 2 simultaneously. The MASK is only for determining the mode switching, and any excessive bright area at night will be excluded by the configured MASK.
Note :
–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.❖ WHITE BAL | [DAY/NIGHT] |
•DAY
WHITE BAL |
|
|
| |
DAY/NIGHT |
|
| DAY | |
MODE |
| AWC | ||
RED | ||||
BLUE | ||||
[0248] |
|
|
| |
|
|
| ||
[0247] |
|
|
| |
|
Note :
–You can set the values of•NIGHT
Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.
If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.
ENG
In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in
English – 21