Samsung SCC-B5345, SCC-B5344 operating instructions Components of your camera, Lens

Components of your camera

Your camera has the following components:

1

2 3

	4
	Lens
5 6
7 8	9
	0

1Cover dome: Covers the main body for protection.

2Main body: Includes a lens, a switch board, a PCB board, screws, and such.

3Mount bracket: Used as a ceiling or wall fixture. It is fixed using three long tab screws provided in the package.

4Cable Stopper: If drawing the cable from a hole in the ceiling, remove this stopper and pass the cable through the opening to connect.

5Zoom lever: Using this lever, the lens zoom can be adjusted and fixed.

6Focus lever: The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for fixing.

7Tilt fixing screw: Using this screw, the slope of the lens can be adjusted and fixed.

8Switch board: Includes two kinds of control switches such as function switches and phase-control switches. The board has eight function switches in the middle and two phase-control buttons on each side of the function switch area.

9Installation Guide Mark: This mark must be aligned with the marking on the bracket when attaching the camera to the bracket.

0Lock releaser: Push it outward and rotate the main body in UNLOCK direction when you want to remove the Mount bracket from the Main body or to remove the installed camera from the Mount bracket.

ENG

!	Video connector	! Cable: Connect the Video connector to BNC cable
	Power connector	and Power connector to power adapter.