Samsung SCC-C4305(P) manual Preset, Home Return Time Setup

✔RS-485 :Sets up RS-485 Communication Protocol, Address, and Baud Rate.

❙PRESET

Select the PRESET menu and press [ENTER] and the PRESET MAP submenu screen will appear.

(SPECIAL)
LANGUAGE	ENGLISH
CTRL TYPE	A
POSI/NEGA	+
D-ZOOM	1
DIS	OFF
DIGITAL ZOOM	OFF
REVERSE	OFF
RS-485	OFF
DETAIL	(1)-I--
V-SYNC	INT
RET

Press the

ENTER button.

(RS-485)

PROTOCOL SAMSUNG

BAUD RATE 9600

ADDRESS 0 RET

(PRESET MAP)
		H 1	2	3	4
	0
5		6	7	8	9
10		11	12	13	14
15		16	17	18	19
20		21	22	23	24
25		26	27	28	29

3031 RET HOME RETURN OFF

EXITQUIT

Press the

ENTER button.

PRESET NO. 0
	...
POSITION SET
PRESET ID	OFF
EXIT	QUIT

E

✔DETAIL : Controls the horizontal or vertical distinction.

✔V-SYNC :INT shall be selected to use internal synchronization. LINE... is used to synchronize several camera phases for the multi camera operation by using an external signal(AC signal). As there may be a slight deviation between sets, adjusts PHASE to overcome this handicap. When you use AC power source, V-SYNC is available. Select LINE... and press [ENTER] and the PHASE control submenu will appear. The PHASE control ranges from -106H to +106H as for NTSC and from -138H to +138H as for PAL.

❖In case of DC power source, the V-SYNC menu is marked --- so that setup is unavailable.

Select the PRESET number and press [ENTER] and the above screen will appear.

✔POSITION SET : Memorizes the position of ZOOM or

FOCUS.

✔PRESET ID : Designates the ID on the basis of the PRESET position as the CAMERA ID.

❖HOME RETURN automatically returns to the HOME position should there is no key input for a certain time. The HOME position is set to PRESET 0 if it is saved or Off if not.

HOME RETURN Time Setup

(SPECIAL)
LANGUAGE	ENGLISH
CTRL TYPE	A
POSI/NEGA	+
D-ZOOM	1
DIS	OFF
DIGITAL ZOOM	OFF
REVERSE	OFF
RS-485	OFF
DETAIL	(1)-I--
V-SYNC	INT
RET

Press the

ENTER button.

(LINE LOCK)

PHASE	----(000) ----I
RET

➞OFF ➞ 1MIN ➞ 2MIN ➞ 3~60MIN ➞ 2 HOUR ➞ 3~12 HOUR

29 30