3-12
E
3-11
SHUTTER
You may designate both the fast electronic shutter speed and low
electronic shutter speed in the SHUTTER menu. The fast electronic
shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to
be used for the bright and fast video image. The AUTO slow electronic
shutter supports 10 shutter speeds from x2 to x160 and sets the shutter
speed to be slow In order to make the image on the screen more distinct
and brighter when you photograph under dark illumination. If you want to
sense the light brightness to control the shutter speed to the brightness
automatically, select the AUTO slow shutter.
Keep pressing both Left and Right in the SHUTTER menu, the speed will
change in the following sequence.
➝ OFF ➝AUTO X2 ➝AUTO X4 ➝AUTO X6 ➝AUTO X8 ➝AUTO X12 ➝
AUTOX16 ➝AUTO X20 ➝AUTO X40 ➝AUTO X80 ➝AUTO X160 ➝OFF ➝
1/100(1/120) ➝1/250 ➝1/500 ➝1/1000 ➝1/2000 ➝1/4000 ➝1/10K
❈ In case the IRIS mode is set to WDR, only the following modes are
available.
➝ OFF ➝AUTO X2 ➝AUTO X4 ➝AUTO X6 ➝AUTO X8 ➝AUTO X12 ➝
AUTOX16 ➝AUTO X20 ➝AUTO X40 ➝AUTO X80 ➝AUTO X160
(VIDEO SET)
IRIS ALC...
SHUTTER OFF
AGC
OFF
WHITE BAL ATW1
DIS OFF
FOCUS MODE AF
SPECIAL ...
EXIT QUIT
WDR
The WDR camera is a state-of-art technology to expand the screen profit,
mostly effective when you photograph both indoor and outdoor. In short,
this function provides you with the distinct reproduction of not only the
indoor but also the outdoor. Press [ENTER] to set up the WDR level and
the FLICKERLESS function.
➜
Press
[Enter]
(WDR)
LEVEL1 L----I ----H
LEVEL2 L----I ----H
FLICKERLESS OFF
RET
(VIDEO SET)
IRIS WDR...
SHUTTER
OFF
AGC
OFF
WHITE BAL ATW1
DIS ON
FOCUS MODE AF
SPECIAL ...
EXIT QUIT
Use [Left, Right] key in the LEVEL menu to control the video output
level(brightness).
(ALC)
BLC USER...
LEVEL (0) ----I----
RET
SIZE
LOCATION
SIZE
LOCATION
SIZE
LOCATION
➜
Press
[Enter]
➜
Press
[Enter]
- LEVEL 1 : Controls the shutter speed while WDR operates.
- LEVEL 2 : Controls the whole brightness while WDR operates.
- FLIKERLESS : This is for preventing flicker on the screen when NTSC
system is used in 50HZ power supply region and PAL system is used in
60HZ power supply region. That is to prevent shaking on the screen
resulted from the discordance of the vertical sync frequency and the
flicker frequency of the illumination. While this menu is ON, the
electronic shutter is fixed to 1/100sec (NTSC) or 1/120 sec (PAL).
Press the
ENTER
button.
(MANUAL)
LEVEL (00) ----I----
RET
MANU
When you press [ENTER] key after selecting MANU in the IRIS item, an
additional screen appears in which you can set manually opening or closing
the IRIS.
CAMERA ID ON...
IRIS MANU...
SHUTTER OFF
AGC LOW
WHITE BAL ATW
FOCUS MODE AF
MOTION DET OFF
COLOR/BW COLOR...
PRIVACY ...
SPECIAL ...
PRESET ...
EXIT QUIT