Samsung SCC-C6455P manual Sync, AGC Color SUP, Reverse, Posi/Nega, Pip

setup

V-SYNC

You can set the V-SYNC mode.

-If you select <INT>, the camera will use the internal synchronization.

-If selecting <LINE>, the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate.

AGC COLOR SUP

You can adjust the color reproduction range according to AGC.

REVERSE

You can reverse the video signal from left to right, upside down, or vice versa to your convenience.

AGC COLOR SUP	MID
REVERSE	OFF
POSI/NEGA	+
PIP	OFF
DIS	OFF

POSI/NEGA

You can set the video brightness signal to normal or reverse.

PIP

You can view a main image with a sub image on the same screen.

M If more than one PRIVACY ZONE is specified, and PRIVACY SET to <ON>, the PIP function is not available.

As long as SENSE UP is set to FIXED, PIP menu is not available.

According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.

DIS (Digital Image Stabilization)

If you set it to <ON> for a camera that is trembled or vibrated from an ambient change, this will automatically compensate for the flicker on the screen.

M If you set <DIS> to <ON>, the image will be enlarged with digital zoom as much area as compensated. (Approximately 1.2 times of the optical zoom factor)

If you set the digital zoom to a larger ratio than the actual enlargement for compensation, the <DIS> function will be disabled.

<DIS> may not work properly in the following images:

Single-colored flat image / Low contrast scene / High frequency image taken under a fluorescent lamp / Regular-patterned image

30_ setup