setup
2. Select the preset number.
|
| PRESET |
|
| ||
0 | 1 | 2 | 3 | 4 | ||
5 | 6 | 7 | 8 | 9 | ||
10 | 11 | 12 | 13 | 14 | ||
15 | 16 | 17 | 18 | 19 | ||
20 | 21 | 22 | 23 | 24 | ||
25 | 26 | 27 | 28 | 29 | ||
30 | 31 | 1/16 |
|
|
| |
|
|
|
| |||
3. | Select <POSITION> and adjust <PAN/ |
|
| PRESET NO. 1 |
|
|
| |
| TILT/ZOOM> to the desired setup using |
|
|
|
|
| ||
|
|
|
| |||||
| the joystick. |
|
|
|
|
|
|
|
| POSITION |
|
|
|
| |||
4. | Set <PRESET ID> to <ON> and enter the | PRESET ID |
|
|
| ON | ||
| PRESET SPEED | [5] |
|
|
| |||
|
|
|
| |||||
| name. | DWELL TIME |
|
| 3SEC | |||
| For entering the name, refer to “CAMERA ID”. | IMAGE HOLD |
|
|
| OFF | ||
| CAMERA SET |
|
|
| ON | |||
|
|
|
|
| ||||
(page 24)
5. Select <PRESET SPEED> and adjust the pan/tilt speed of the preset.
6.Set the <DWELL TIME> that defi nes the
camera's hold duration and <IMAGE HOLD> of the preset.
If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the camera reaches the preset position.
7.Set <CAMERA SET> to <ON>.
You can adjust camera setups for each |
|
| CAMERA SET |
|
|
|
|
|
| ||
preset. |
|
|
|
|
|
IRIS |
| ALC | |||
For details on setting <IRIS>, <WHITE BAL> | WHITE BAL |
|
| ||
FOCUS MODE |
| MF | |||
and <FOCUS MODE>, refer to “CAMERA |
|
|
|
|
|
SET”. (pages 24 ~ 32) |
|
|
|
|
|
M If VPS is set to ON in Camera Setup from |
|
|
|
|
|
the main menu, the camera will operate in |
|
|
|
|
|
VPS even if it's set to WDR in PRESET. |
|
|
|
|
|
If you use WDR in PRESET, the camera will operate in WDR and release any previous settings even if AGC has been set to FIX, SHUTTER to ON, SENSE UP to FIX in the main menu.