Version 1.1

4-2-1.CAMERA SETUP

You can configure the general settings of the module. Select <MAIN MENU> → <CAMERA SET>.

The Camera Setup menu appears.

Change the settings as necessary, or select an item to check.

●CAMERA ID

The CAMERA ID menu is used for you to assign a unique name to a camera.

Use ▲▼▶◀_to select a desired character, then press [ENTER]. In the lower input box of the screen, the selected character will be entered.

-You can enter up to 54 characters including alphabets, numbers and special characters.

-LOCATION : Specify the display position of the camera ID.

When done, press [ENTER]. The camera ID will be displayed in the specified position.

●IRIS

The IRIS menu is used if you want to adjust the intensity of radiation incoming to the camera.

◇ALC (Automatic Light Control)

Adjust the open and close of the iris.

- LEVEL : Select an overall brightness level.

The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “.” will decrease it.

-BLC : With <BACKLIGHT> set to <BLC>, you can specify the BLC area. With AREA set to <USER>, you can specify the position and size.

If you use an ordinary camera in a scene with an intensive back light, the object will be displayed dark on the monitor affected by the back light. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.

-15 -