![](/images/new-backgrounds/1127067/1270679x1.webp)
SEB-100 Installation
1.Choose a place hard enough to endure 5 times the total weight of the product before installation.
E
2. Separate the
3.Put a extension box in the installation place and fix it with screws as shown below.
Arrange the 2 cables in need well and connect the camera cable to IN and the monitor cable to OUT.
IN | OUT |
8
4.Check the distance between the camera and monitor and turn the 1~4 switches on and off to control the distance. Then, close the case. (Refer to Table 1 in Page 5 for the installation of SW2).
SW2
E
9