4.7

Appendix
Replacing the fitted plug

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has
a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp
fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use
the plug until you get another fuse cover from the people from whom you bought the
machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.

Warning

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug or you may get an electric shock if

you put it into a socket.

Important warning: You must earth this machine
The wires in the mains lead have the following colour code:
Green and Yellow: Earth
Blue : Neutral
Brown : Live
If the wires in the mains lead do not match the colours marked in your plug, do the
following:
You must connect the green and yellow wire to the pin marked by the letter ‘E’, or by
the safety ‘Earth symbol’ or coloured green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter ‘N’ or
coloured black.
You must connect the brown wire to the pin which is marked with the letter ‘L’ or
coloured red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.