INITIAL OPERATION

All of the following should be satisfied when tested in the following order. If not, check electricity supply. When cause of trouble can not be located, contact your dealer.

1

Place all shelves, all kinds of vessels in their

4

Set temperature control at “HIGH” position and

proper positions which have been removed

let refrigerator operate for one hour. Freezer

for transportation.

compartment should get slightly chilled and

motor should run smoothly with no noise but soft hum.

2

Clean refrigerator and parts to remove dust

5

Store food after the temperature in the

incurred in shipping and packing.

refrigerator gets sufficiently low. It takes a

 

 

few hours after starting the refrigerator to reach the proper temperature.

3

Interior lamp should light on during

refrigerator door is opened.

Your refrigerator is operated by a compressor which switchs “on and off” to maintain the internal temperature. When the compressor is new, it requires running in for a period of up to 5 months. During this period it may operate a little noisily. This is quite normal and does not represent a fault.

6