Cooling Your Room
M
ODE
TURBO
OFF
You must select the Cool mode if you wish to adjust the:
◆Cooling temperature
◆Fan speed when cooling
1If necessary, press the 
(On/Off) button.
Result: ◆ The OPERATION indicator on the indoor unit comes on.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up normally after a
ODE
TURBO
OFF
2If the 
indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press | MO | DE . |
◆The air conditioner starts up in Cool mode.
Note You can change modes at any time.
M
ODE
TURBO
OFF
3To adjust the temperature, press the 
or
buttons one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press | or | : |
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.
4Select the fan speed by pressing the 
button one or more times until the required setting is displayed:
Low
Medium |
|
High |
|
Automatic |
|
Result: Each time you press | , the indoor unit beeps. |
5To control the direction of the air flow, refer to page 15.