appendix _57
09 APPeNDIX
3. Recording Schedule Display:
Allows the user to schedule various recording modes
for individual cameras. Select a desired recording
mode and drag using the mouse to designate the
timeframe.
4. Recording mode:
Displays various recording modes that are available.
Select a desired recording mode and drag over to the
schedule line using the mouse to assign.
Continuous: Refers to continuous recording
regardless of an event occurrence.
motion Detection: Refers to recording only when
motion is detected.
Sensor: Refers to recording only when a sensor
(alarm-in) event is detected.
EVENT RECORDING mODE
event Recording Settings
This tab is used to configure each camera’s event
recording settings (frame rate, picture quality, resolution,
pre- and post-event recording durations).
1. Reset:
Resets all settings to their default values.
2. Frame Rate:
Used to configure event recording frame rate.
3. Picture Quality:
Used to configure the level of recording quality.
4. Resolution:
Used to configure the recording resolution.
5. Pre-event:
Used to configure the duration of recording leading up
to an event.
6. Post-event:
Used to configure the duration of recording following
an event.
Alarm Detection Settings
Alarm detection bases on sensor signals to trigger
recording and/or sound the alarm when an event is
detected.
1. Sensor Channel:
Select the sensor (alarm-in) you wish to configure.
2. Sensor mode:
Set sensor mode to N.O or N.C.
3. Camera:
Select the camera(s) you wish to assign to the selected
sensor. The selected camera(s) will start recording
when a sensor event occurs.
4. Alarm:
Used to configure the alarm to sound when a sensor
event is detected.
5. Duration:
Used to configure the event-triggered alarm duration.
1
3
4
5
6
2
2
4
3
5
1
SHR-6042_Eng.indb 57 2009-06-05 오전 11:23:52