Samsung SL50B Starting the Multi Slide Show, Start the Multi Slide Show, Selecting Images

Starting the Multi Slide Show ( )

Images can be displayed continuously at preset intervals.

You can view the Multi Slide Show by connecting the camera to an external monitor.

1.Press the play mode button and press the MENU button.

2.Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Start] menu.

1.Use the Up / Down button to select the [Start] menu and press the Right button.

Selecting Images

You can select image to view
1. Use the Up / Down button to select the		Start
[Images] menu and press the Right		Images	All :All
button.		Effect	Date:Off
		Interval	:1 sec
2. Select a desired sub menu by pressing			Select
		Music	:Off
the Up / Down button.
[All]	: All images saved on the
		Back	Set
	memory are played back.
	Press the OK button and the settings are saved.
[Date]	: Images taken in a specified date are played back.

2.Select a desired sub menu by pressing the Up / Down button.

[Play] : The Multi Slide Show is closed after one cycle.

[Repeat] : The Slide show is repeated until cancelled.

Start	Play
Images	:All
	Repeat
Effect	:Off
Interval	:1 sec
Music	:Off
Back	Set

Press the OK button and the settings are saved. [Select] : Play only the selected images. If you press the Up /

Down button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as

3.Press the OK button and the slide show will be started.

-To pause the slide show while playing it back, press the OK button again.

-Pressing the OK button again will cause the Multi Slide Show restart.

-To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.

[Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically.

You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button and the settings are saved.

3.Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.

071