Samsung SM-T320, SM-T320NZKAXAR, SM-T320NZWAXAR Scan and Connect to a Wi-Fi Network, Add a Wi-Fi Network Manually

71
Scan and Connect to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for and
displays available Wi-Fi connections.
1. From any screen, touch the top of the screen and
swipe downward. The Notification Panel displays.
2. Touch
Wi-Fi to turn Wi-Fi ON (green). Your device
begins scanning for available Wireless Access Points.
Note: To begin a new scan for available WAPs, touch Scan .
3. When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open (unsecured), your
device automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Tip: You can have your device automatically notify you of
available networks. See
Network notification under “Wi-Fi
Settings” on page 72.
Note: When Wi-Fi is on, is displayed on the Status Bar.
Add a Wi-Fi Network Manually
1. From a Home screen, touch ➔ Settings ➔
Connections tab ➔ Wi-Fi .
2. Touch the
OFF / ON button to turn Wi-Fi ON .
3. Touch
Add Wi-Fi network and enter the following:
• Network SSID : Enter the name of the Wi-Fi Wireless Access
Point (WAP).
• Security : Select the type of security used by the WAP.
Note: Depending on the security protocol used by the WAP,
additional network information may be required, such as
a password.
• Password : If the WAP is secured, enter the password or
hex key.
4. Touch Connect .