Appendix
A small gap appears around the outside of the device case•This gap is a necessary manufacturing feature and some minor rocking or vibration of parts may occur.
•Over time, friction between parts may cause this gap to expand slightly.
Removing the battery
•To remove the battery, you must visit an authorised service centre with the provided instructions.
•For your safety, you must not attempt to remove the battery. If the battery is not properly removed, it may lead to damage to the battery and device, cause personal injury, and/or result in the device being unsafe.
•Samsung does not accept liability for any damage or loss (whether in contract or tort, including negligence) which may arise from failure to precisely follow these warnings and instructions, other than death or personal injury caused by Samsung’s negligence.
1
2
Insert the device opening tool into the gap between the device’s screen and the back cover.
Then, start separating the screen from the back cover by using the tool to pry them apart.
Continue reinserting the tool and prying the screen and the back cover apart at close intervals around the device.
3 When the screen is disengaged, separate the screen and the back cover.
Then, put the back cover aside and place the screen face down on a flat work surface.
4
5
6
Loosen and remove the screws.
Disconnect the battery connector and remove the tape.
Remove the battery.
98