Charging the built-in rechargeable battery
The built-in battery is always recharged while your camcorder is connected to the AC power or while the
battery pack is attached.
If the camcorder is not in use for about 2 months without connecting to the AC power or attaching the
battery pack, the built-in battery fully discharges. If this occurs, charge the built-in battery by connecting
to the supplied AC adaptor for 24 hours.
After setting, the date and time are automatically recorded on a special data area of the storage media.
•
•
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the Date/Time mode. ➥page 91
Simple setting of the clock by time difference
You can easily set the clock to the local time by setting a time difference when using your camcorder abroad.
Select "Time Zone" on the menu, then set the time difference. ➥page 88
•
•
36_English
preparation