108 109
108 109
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust automatically.
Set “Focus” to “Auto.” page 56
The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 57
The lens is dusty on the surface. Clear the lens and check the focus.
You are recording in a dark place. Increase the brightness.
•
•
•
•
The image appears too bright or flickering, or
changes in colour.
This occurs when recording images under a fluorescent lamp, sodium lamp, or
mercury lamp. Cancel “iSCENE” to minimise these phenomena. page 46
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the playback (Play/Pause) button did not
start playing.
Press the MODE button to set Video Play mode.
Image files recorded on another camcorder may not play on your camcorder.
Check out memory card compatibility. page 32
•
•
•
The Skip or Search function does not work properly. If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Playback is interrupted unexpectedly. Check if the AC adaptor or battery is properly connected and stable.•
You cannot hear sound when playing a Time Lapse
recording. The Time Lapse REC function does not record sound. page 63•
Photos stored on a storage media are not displayed
in the actual size.
Photos recorded on other devices may not appear at actual size.
This is not an error.
•
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view the image or hear the sound on the
connected device.
Connect the audio line of the Audio/Video cable jack to your camcorder and
the connected device (TV, DVD recorder, etc). (Red colour- right,
White colour- left)
The Audio/Video cable jack is not connected properly. Make sure that the
Audio/Video cable jack is connected to the proper jack. page 94
•
•
Troubleshooting