Samsung Samsung SmartCam WiFi Home Security Camera quick start Adding Your Camera, Unpacking

SNH-1010N English

Quick Start

Guide

Thank you for purchasing the Samsung SmartCam WiFi Home Security Camera. Follow the simple steps in this guide

to set up and start using your new SmartCam.

If you have any questions or need help installing your new product please contact our free technical support.

Telephone : 1-877-349-3149

9am - 9pm EST, Monday - Friday

Internet : http://www.samsungsv.com/Support/Index

Related manual can be downloaded from https://www.samsungsmartcam.com/web.

The SmartCam webpage and mobile menu may be subject to change without prior notice.

1.CONNECTING THE CAMERA TO YOUR ROUTER

1) Connect the power adapter to the camera.

2) Connect the network cable to the camera and your network router.

Connect one end of the enclosed network cable to your camera and the other to an open port on your router. Once setup is compete, you will no longer need the network cable and the camera will connect to your WiFi network.

3) The camera bootup will take about 1 minute then the camera status LED will change from red to white.

JJ If your WiFi router supports WPS feature, refer to the user manual to connect via WPS button.

2-1.SETTING UP YOUR ACCOUNT FROM MOBILE PHONE

3)Check to agree to the terms and conditions, and then tap <Next>.

4)Enter the required information and Tap <Register>.

•ID : Create user ID using letters, numbers and periods between 8-14 characters.

•PW : Create password using letters and numbers except colons and commas between 8-14 characters.

•Confirm Password : Checks whether your password is entered correctly.

•Name : Enter your name.

•E-mail : Email address is used to recover your account password.

2-2.ADDING YOUR CAMERA

1)Log-in.

2)Tap <Add Camera>.

3)Select the camera found and tap <next>.

 When your smartphone is connected to the same

5)Create the <Camera password> and

<Camera Name>, and then tap <Add>.

Create camera password using alphanumeric characters between 1 to 8 without any space. Example : q1

6)Tap <Go To Camera List>.

If there is a camera to register additionally, tap <Register new camera>.

2-3.CONNECTING CAMERA TO WI-FI NETWORK

1)From the camera list, tap on the [ ] for cameraoptions.

2) Tap on <Setup> icon.

3) Enter the camera password you created for this camera and Tap <OK>.

4)	Tap the <Network setting>.
5)	Turn WiFi on.

2-4.VIEWING LIVE VIDEO

1)Tap on the camera icon [ ] to view live video.

Tap on the arrow icon [ ] for camera options.

2)Enter the <Camera password> for the camera selected. This is the same camera password you created at the time you registered the camera.

Check the <SAVE> option to save the camera password. Within 20 seconds, it will start streaming.

Video loading time will vary depending on your internet connection.

™™ General setting

1)	Tap <General setting>.
2)	Configure the basic camera settings.
	• Camera Name : Camera name is used to easily
	identify the camera when you have more than one.
	i.e., Living room, Kitchen, Bedroom.
	• Event Alarm : Specify whether to trigger the alarm
	or not, and specify the sensitivity.
	The higher the sensitivity is, the subtler motion/
	audio events will be detected.
	• Night Vision : Set the IR lighting.
	Check <Night Vision> to set the camera to switch to the night vision
	mode automatically.
	• Audio : Adjust the volume of the built-in microphone and speaker of the
	camera as appropriate.
3)	Configure the notification.
	• Push Notification : Check to receive push notification
	to your phone.
	• YouTube : Tap [ ] to enter your YouTube account
	information to upload 30 video clips to your YouTube
	account when event is detected.

UNPACKING

Make sure all following items are in the packaging:

Camera	Adapter	Network Cable	Double Sided	Bracket	Quick Guide X3	Warranty Card /
			Tape			GPL License

JJ Please keep the packaging

You will need the serial number that on the side of the packaging to register the camera.

Download the Samsung Smartcam App on to your Android phone or your iPhone.

Search keywords for the application: “Samsung SmartCam”, “Smartcam”, “SAMSUNG TECHWIN”, “TECHWIN”.

1)Run the downloaded application.

2)Tap <Sign up here>.

WiFi network as the camera, it will automatically search for the camera.

4) If the camera is not detected, please enter the camera serial number manually.

Tap on [ ] for more information.

XXXXXXXXXXXXXXX

6)	Select your WiFi network and enter your WiFi
	network password.
	• Other WiFi Networks : Enter the SSID name and
	password to connect to the network.
7)	Tap <OK> and unplug the network cable from the camera and
	the router.
	 The WiFi status LED will become steady white once the camera is
	connected to the Wireless Access Point. (may take up to 30sec).
	You can now unplug and place the camera anywhere within your wireless
	network range. If the camera LED did not turn solid white, please contact
	our tech support at 1-877-349-3149.
8)	Tap <Back> and select <Live> to see the video.

2-5.Camera Setup

Tap the <Setup> icon to configure a camera to be monitored.

• Picasa : Tap [ ] to enter your Picasa account

information to upload a picture to your Picasa

account when event is detected.

4) Tap <Apply>.

™™ Time setting

1)Tap <Time setting>.

2)Set the camera’s clock.

•Time Zone : Select your region.

•Summer Time : Check this option if you live in a country or region where DST(Daylight Saving Time) is applied.

PT01-001489A