Important Safety Instructions
E
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
6.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (The manufacturer is not liable for any damage resulting from unauthorized disassembly or repairs.)
7. When cleaning, do not spray water directly onto parts of the product. (Doing | E |
so may cause fire or electric shock.) Wipe the surface with a dry cloth. |
|
| |
Never use detergents or chemical cleaners on the product, as this may result |
|
in discoloration of surface or cause damage to the finish. |
|
1.Make sure that the cable is plugged in securely before using. (A loose connection may result in fire.)
2.When installing the camera on a wall or ceiling, mount it safely and securely. (A falling camera may cause personal injury.)
3.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Serious injury may result from fire, electric shock, or falling objects.)
4.Do not install in a sooty, dusty, or humid location. (Doing so may cause fire or electric shock.)
5.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electric shock.)
1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference.
2.Do not install in a location subject to high temperature (over 50°C/122°F), low temperature (below
3.Avoid a location which is exposed to direct sunlight, or near heat sources such as heaters or radiators. (Neglecting to do so may result in a risk of fire).
4.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
5.Install in a well - ventilated location.
6.Remove the power plug from the outlet when there is a lightning storm. (Neglecting to do so may cause fire or damage to the product.)
2 | 3 |
