| Care and Maintenance | Contact SAMSUNG WORLDWIDE | Othe r |Authority |
To clean the exterior and lens of the projector
Clean the project or using a so ft dry cloth.
Do not clean the projector wit h flammable
substances such as benzene, thinners or a wet
cloth, as these may cause problems.
Do not touch the projector wit h a nail or any
other sharp objects, as this may scratch the
surface.
To clean the interior of the projector
For cleaning the interior of the projector, ask your
Service Center or a distributor.
Contact your distributor or a Service Center if
dust or other substances are inside the
projector.
Lamp Replacement
Cautions on Lamp Replacement
The projector lamp is en expandable item. For best operating performance, replace the lamp according to the
usage time. You can view the lamp usage time in the Information Display (INFO button).
Use the recommended lamp when replacing. Lamp specifications are defined in the user’s manual. Replace
with the same model provided with the projector.
- Lamp Model Name : 200W Philips fusion lamp
- Lamp Manufacture : Philips Light ing
- Lamp Life Time : 3000Hrs
- Lamp Type : 200W UHP
Check that the power cord is unplugged before replacing the lamp.
Even after the power cord has been disconnected, the lamp will be hot. Allow it to cool down for at least 1 hour
before changing the lamp.
The lamp is located at the lef t rear of your projector.
Before you turn the projecto r over to change the lam p, cover the projector wi th a soft cloth on a f lat surface.
Do not leave the old lamp near i nflammables or in reach o f children. There is a danger of burn or injury.
Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.