When handling the lamp, avoid touching any part of it except for the handles. If you ha ndle the lamp
incorrectly, it may affect the screen quality and shor ten its lifetime.
The projector is will not opera te normally if the cover is not locked completely after lamp replacement. If your
projector does not operate normally, refer to the LED Indications.
Lamp Replacement Procedure
The lamp is very hot and opera tes
with a high voltage. Allow it to cool
down for at least 1 hour afte r
disconnecting the power cord
before changing the lamp.
The lamp is located at the bottom
of the product.
Place the product so that its
bottom looks upward and remove
the screws that hold the lam p
cover in place.
* When placing the product with
the bottom upwards, make sur e to
place a soft cloth on the floor to
prevent scratches.
Slide and open the cover in t he
direction of the arrow, as sho wn in
the figure.
Remove the screw indicated in the
figure.
Hold and pull the lamp handle
slightly, as shown in the figure.
Assembling a new lamp is in th e reverse order of the di sassembly.
| Care and Maintenance | Contact SAMSUNG WORLDWIDE | Othe r |Authority |
North America
U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us
CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca
MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx