3-5 Using
3-5-3. Setup
Zoom You can magnify the screen to a size you want.
• <x1> - <x2> - <x4> - <x8>
This function is only enabled when the input signal is a PC Timing (D-Sub/HDMI) signal.
Dynamic Contrast Dynamic Contrast automatically adjusts the picture contrast to maintain the general balance of bright-
ness and darkness.
• <Off> - <On>
When using <Dynamic Contrast>, the text in still pictures may appear unnatural.
MENU DESCRIPTION
Install To tailor the picture to the installation location, (for example, behind a semi-transparent screen, hang-
ing from the ceiling), you can invert the projected images vertically / horizontally.
• <Front-Floor> : Normal Image
• <Front-Ceiling> : Horizontal/Vertical Reversed Image
• <Rear-Floor> : Horizontally Reversed Image
• <Rear-Ceiling> : Vertically Reversed Image
LED Mode You can change the picture brightness by adjusting the amount of light generated by the LED.
• <Eco> : This mode is optimized for screens smaller than 100 inches.
This mode decreases the lamp brightness and power consumption in order to extend the LED
lifetime and reduce noise and power consumption.
• <Bright> : This mode maximizes the LED brightness when the ambient light intensity is somewhat
bright. As the LED brightness increases, the LED lifespan may be reduced and the noise and
power consumption may increase.
Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the <Auto Keystone>
function to <On> so that the <V-Keystone> function automatically starts.
• <Off>-<On>
V-Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone func-
tion.
The sound output of your projector is temporarily stopped while the keystone is being changed.
Keystone does not compensate for distortion in the On Screen Display (OSD) menu.
Background You can select an image or screen which will appear when there is no signal from the external device
connected to the projector.
<Logo>-<Custom Logo>-<Blue>-<Black>
MENU DESCRIPTION