English-4
Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
1Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted”
is displayed on the screen. If the channel information does not exist, the message “Updating
Channel List” is displayed during channel information configuration. It could take several
minutes to update the channel information depending on your cable service provider.
2The pairing information containing a telephone number, CableCARD ID, Host ID, and other
information will be displayed in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
3When the channel information configuration has finished, the message “Updating Completed”
is displayed, indicating that the channel list is now updated.
4The Channel list can now be displayed by pressing CH LIST button.
• Once the channel list has been updated, only the channels on the channel list can be
selected.
• Remove the CableCARD by carefully pulling it out with your hands since dropping the
CableCARD may cause damage to it.
TV
Power cord
From cable TV
Please insert the card as shown.
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 4