Samsung SP47Q1 Selecting the Sound Mode (depending on the model)

BP68-00280A (J59A_Euro_ENG) 4/13/04 1:59 PM Page 45

Selecting the Sound Mode (depending on the model)

The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission.

	Type of broadcast	On-screen indication
	Regular broadcast		Mono (Normal use)
	(Standard audio)
	Regular +		NICAM	↔	Mono
NICAM	NICAM Mono		Mono	(Normal)
Stereo	NICAM Stereo		NICAM	↔	Mono
			Stereo	(Normal)
		NICAM → NICAM → Mono
	NICAM Dual I/II	Dual I		Dual II	(Normal)
		→			→
	Regular broadcast		Mono (Normal use)
	(Standard audio)
A2
	Bilingual or Dual I/II		Dual I ↔ Dual II
Stereo
	Stereo		Stereo	↔	Mono
				(Forced mono)

➢◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono.

◆If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

◆When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-IIbutton.

English - 45