Samsung SPA400BCX/EDC manual Color Temperature Offset Gain, Full, 169, Zoom1, Zoom2, Wide Fit

emphasized.

-9300K : The color temperature appropriate to very bright places such as a shop.

1)	Color Temperature	5)	R-Offset
2)	R-Gain	6)	G-Offset
3)	G-Gain	7)	B-Offset

4) B-Gain

8)Gamma : An image compensation function that controls the settings according to the video properties.

-Film : The best setting for watching a film.

-Video : The best setting for watching a TV program.

-Graphic : The best setting when you have a PC connected.

9)Save : Used to save custom picture settings.

10)Reset : Restores the mode settings to the factory defaults.

Size	You can select a screen size according to the type of scene.
	▶ Refer to "Size Support Mode".
	1)	Full
	2)	16:9
	3)	Zoom1
	4)	Zoom2
	5)	Wide Fit
	6)	4:3
Position	Adjust the screen position if it is not aligned.
	▶ Refer to "Position Moving Support Mode".
Digital NR	When a dotted line is displayed or the screen shakes, you can view a better visual
	quality picture by enabling Noise Reduction.
	▶ Digital NR can only be selected in [Video], [S-Video], [Component] and [PC] modes.

Black Level Using the Black Level function, you can set the light level of the darkest portion of the video signal so that you can clearly see dark areas on the screen.

▶The Black Level can only be selected in [Video]and [S-Video] modes.

1)0 IRE : Sets the light level of the darkest portion of the video signal to low. If the setting does not match the input signal, the dark screen looks milky-white.

2)7.5 IRE : Sets the light level of the darkest portion of the video signal to high. If the setting does not match the input signal, the dark screen is saturated and may not display properly.

Color Pattern You can filter the color of the entire screen according to your taste.

1)Off : Shows the picture in the original color.

2)Monochrome : Shows the picture in black and white by filtering out all color signals.

3)Red : Shows the picture in red by filtering out the green and blue color signals.

4)Green : Shows the picture in green by filtering out the red and blue color signals.

5)Blue : Shows the picture in blue by filtering out the red and green color signals.

Overscan	Using this function, you can cut the edge of the picture when unnecessary information,
	images appear on the edge of the picture.
	▶ Refer to "Size Support Mode".
	1)	Off
	2)	On

G-Gain

B-Gain

R-Offset

G-Offset

B-Offset

Gamma

Save

Reset