Manuals / Samsung / Computer Equipment / Projector

Samsung SPD300BX/EDC, SP-D300BX manual Connecting to VCR/Camcorder, Connecting to PC

Models: SP-D300BX SPD300BX/EDC

1 39

Download 39 pages 51.05 Kb

Page 22

Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on the manufacturer.

Connecting to VCR/Camcorder

Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable.

-If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. Using the S-VIDEO connection, provides a higher visual quality.

When finishing connecting the devices, connect the power of the projector and the VCR.

Using the Projector

Turn on the projector and press the [Video] button to select <Video>. or

Press the [S-VIDEO] button to select S-Video.

Check that the projector and the video equipment are turned off before connecting cables.

This projector does not support sound. (Separate audio system is needed for sound.)

Connecting to PC

Image 22

Samsung SPD300BX/EDC, SP-D300BX manual Connecting to VCR/Camcorder, Connecting to PC

Contents

Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletUnplug the power plug before cleaning the product Keep the power cord away from heatersKeep the product out of children’s reach Place the product on the ground carefullyDo not drop the product while carrying it Do not disassemble, or attempt to fix or modify the productThere is a danger of fire or explosion Make sure to place your remote control on a table or desk Page Optical engine with advanced DLP technology Front/Upper SideAdjustable Feet UnpackingSold separately Clearing Indicator ProblemsLED Indications Center Rear SideMove MenuOFF Hdmi ReturnExit 16. P.MODESupported Display Modes Supported Resolution/Size Modes Picture Position Modes576p Component 480p 576i 480i Select Menu Setup Install Front-Floor Installing the ProjectorSelect Menu Setup Install Rear-Floor Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Rear of Projector Using the Projector Connecting a DVD player/Cable/Satellite Box to HDMI/DVIConnecting a DVD player/Cable/Satellite Box via Component Connecting to VCR/Camcorder Connecting to PCConnecting Video Devices Monitor, TV, etc PC in input terminal Component Video Standard You can only adjust Color in S-Video and Video modesYou can only adjust Tint in S-Video and Video modes Movie1, Movie2Size Color Temperature Offset GainFor Hdmi Mode NormalInstall Light SettingMaximum and then perform Fine Adjustment again Only activated in the PC environmentTime Sec 90 sec 10 sec 120 sec 30 sec 60 secOff Menu and Remote Control Installation and ConnectionScreen and External Source Defaultfrom the menu To clean the interior of the projector To clean the exterior and lens of the projectorClean the projector using a soft dry cloth Lamp ReplacementLamp Replacement Procedure Latin AmericaCIS Antenna in Port GlossaryAnalog Broadcast Black LevelRS-232C Port Service Input Port Color TemperatureGamma Mode Cable Broadcast