Samsung SPH710AEMX/EDC Connecting to PC, Using PC Video Cable or DVI Cable, Viewing the PC Screen

Connecting to PC

Connecting to PC

Connecting to PC

You can connect a PC to the projector and use it as a monitor.

Using PC Video Cable or DVI Cable

Rear side of Projector

Rear Connection

DVI-D Video	PC Video
Cable	Cable
	or

DVI-D Port

Connect PC (RGB In) port on the rear side of the projector to the monitor output port

1of PC using PC video cable.

■ If PC has a DVI output port, connect it to DVI port of the projector.

This product supports Plug & Play. No driver installation is needed for Windows XP.

NOTE

Viewing the PC Screen

	1 Turn on the projector and press the PC button	PC
PC	to select PC. If the projector is connected to
	DVI, press the DVI button to select DVI.
1
	■ If PC Mode is not available, check PC video cable is
	in place.

2 Turn on the PC and set the PC Environment when necessary. (Page 59)

3 Adjust the screen. (Pages 62~65)

■ Enjoy better picture quality by using DVI-D cable (supports digital signals only)

NOTE

instead of PC Video cable.

■DVI-I cable (supports analog signals) is not supported. Use DVD-D cable.

■Sound comes out from PC speakers.

60