MENU

DESCRIPTION

 

 

Digital NR

When a dotted line is displayed or the screen shakes, you can view a better visual quality picture by

 

enabling Noise Reduction.

 

When the input signal is PC Timing (D-Sub/HDMI), <Digital NR> does not operate.

 

 

Black Level

You can select the signal black level according to the input signal. If it is unsuitable for the input sig-

 

nal, the dark parts may appear clearly or may be dim.

 

The <Black level> can only be set for the 480i and 576i RGB signals of [AV], [S-Video], and AV

 

Timing (D-Sub) modes.

 

• For [AV], [S-Video], and the 480i and 576i signals of AV Timing (D-Sub).

 

• <0 IRE> : Sets the black level to <0 IRE>.

 

• <7.5 IRE> : Sets the black level to <7.5 IRE>.

 

• For the RGB signal of <HDMI> mode.

 

• <Normal> : Used in a normal environment.

 

• <Low> : Used when the dark part is shown too bright.

 

 

Overscan

Using this function, you can cut the edge of the picture when unnecessary information or images

 

appear on the edge of the picture.

 

This is not supported in [AV] and [S-Video] modes.

 

This is supported only when the input signal is AV Timing (D-Sub) or AV Timing (HDMI).

 

If <Overscan> is turned off, unnecessary extra parts at the edges of an image may be shown.

 

In this case, turn <Overscan> on.

 

 

Film Mode

Using this function, you can set the display mode optimized for playing movies.

 

• <Off>-<Auto>

 

<Film Mode> can only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing (D-

 

Sub) signals.

 

 

PC

Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise

 

is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine

 

Adjustment again.

 

These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal.

 

Refer to PC Timing (D-Sub/HDMI).

 

• <Auto Adjustment> : Used to adjust the frequency and phase of PC screen automatically.

 

• <Coarse> : Used to adjust the frequency when vertical lines appear on PC screen.

 

• <Fine> : Used to fine tune the PC screen.

 

• <Reset> : Using this function, you can reset the PC menu settings to the factory default settings.

 

 

Zoom

Enlarges the PC screen to 2X, 4X, or 8X.

 

This function is only enabled when the input signal is PC Timing (D-Sub/HDMI).

 

 

3-5

Using