Samsung SW-248F Recommended Disc Types, General DMA Installation Guide Windows 98/Me, DMA Setting

Troubleshooting

Recommended Disc Types

CD-RRICOH , MCC , RITEK , CMC , PRINCO , SKC , BEALL , PRODISK , MAXELL , ACER , MBI , MPO , FUJI , MCI

CD-RWCD-RW : RICOH , RITEK , MCC , PRODISK , SKC , CMC (1X - 4X)

H/S-RW : RICOH , CMC , RITEK , ACER , PRODISK , SKC (10X)

CMC , RITEK (16X)

U/S RW : MCC , RITEK (24X)

General DMA Installation Guide Windows 98/Me

Important!

Please read the entire DMA installation guide before installing your CD-R/RW drive.

About DMA Installation

For stable writing performance at high speeds, Installation of DMA transfer mode for E-IDE/ATAPI interface is strongly recommended. We recommend DMA mode for fast writing.

DMA Setting

Before you install your CD-R/RW drive, we recommend to set DMA to enabled on your PC system. See the following procedure to set DMA transfer mode in windows oprerating system.

(Windows 98/ME)

+Click on START

+Click on Settings

+Select Control Panel

+Select the System Icon

+Select the Device Manager panel in System Properties

+Select your CD-R/RW drive

+Click on the Properties button

+Click on the Settings tab

+Check the DMA checkbox to enables DMA.

+Click OK

+Restart your PC

+Expand the CD-ROM icon

Windows 2000/XP

Select the DMA mode by selecting

[Start > Setting > Control Panel > System > Device Manager > IDEATA/ATAPI Controller > Default/Assistant IDE Channel Advanced Information]

English - 17