Important Note About Service
•• An administration fee may be charged if either
(a)an engineer is called out at your request and there is no defect with the product (i.e. where the user manual has not been read).
(b)you bring the unit to a repair centre and there is no defect with the product (i.e. where the user manual has not been read).
•• You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-8500S to a Soundbar
1. Connect the Wireless Receiver Module to 2 Surround Speakers
Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver Module.
•• The speaker cables are colour coded.
L | R |
| ID SET |
L | R |
SURROUND SPEAKERS OUT | |
| POWER |
•• When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1.Insert the grey plug into the grey jack on the Wireless Receiver.
2.Insert the blue plug into the blue jack on the Wireless Receiver.
•• When connecting the speaker cables to the surround speakers, follow these steps:
1.Match the speaker cable connected to the grey jack to the speaker with the grey label.
2.Match the speaker cable connected to the blue jack to the speaker with the blue label.
3.Insert the red and black coloured ends of each speaker cable into the red and black jacks of the appropriate speakers.
•• The labels are on the backs of the speaker.
