Samsung SWL-2200C 3. MagicLAN Installation For Windows 98/ME/NT4.0/2000/XP

3. MagicLAN Installation For Windows 98/ME/NT4.0/2000/XP

We will explain the installation method for SWL-2200C(CF Card) .

Here are some steps you will perform in establishing your wireless network connection:

1. Install the Access Point at first. AP is needed in case of Infrastructure network

mode.

2. You should install the Wireless LAN Card (SWL-2200C).

3. Install the software using the Installation CD.

4. Install the network protocol(s) required to communicate on your network. Most

likely you will need the TCP/IP protocol.

Please follow the following steps one by one to install the CF Card successfully.

< Method 1 - Inserting card first >

1. Insert the CF Card into the PCMCIA slot of your computer.

Add New Hardware Wizard appeared and the system looks for “SAMSUNG-

11Mbps WLAN Card”. Press NEXT button and check if Search for the best

driver for your device(recommended) is slected and then press NEXT button .

Insert the MagicLAN Installation CD into the CD-ROM drive.

3. Mark the

Specify a location tap and type “E:\Drivers” right below in this

tap(Where E is the CD-drive of your PC).