26
English
Basic Features

¦Sound Systems, Etc.

MENU
m
→ Sound → ENTER
E
Broadcast Audio Options
■Audio Language
(digital channels only)
Change the default value for audio languages.
✎
The available language may dif fer depending on the
broadcast.
■Audio Format
(digital channels only)
Select the audio format.
■Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.
✎
Audio Description (Off / On): Turn
the audio description function o n
or off.
✎
Volume: Adjust the audio description volu me.
Additional Settings
(digital channels only)
■DTV Audio Level (MPEG / HE-AAC): This function allows
you to reduce the disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a
desired level.
✎
According to the type of broadcast sig nal, MPEG /
HE-AAC can be adjusted betwee n -10dB and 0dB.
✎
To increase or decrease the volume, adjust bet ween
the range 0 and -10 respectively.
■SPDIF Output: SPDIF (Sony Philips Digital InterFace) is
used to provide digital sound, reducing interference going
to speakers and various digital devices such as a DVD
player.
– Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎
The available Digital Audio outp ut (SPDIF) format
may differ depending on the inp ut source.
– Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
✎
It's not available for TB300 series.
■Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a voice
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sou nd, and RF to
reduce the difference betwe en loud and soft sounds
at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Speaker Settings
■Speaker Select (External Speaker / TV Speaker):A sound
echo may occur due to a difference indecoding speed
between the main speaker and theaudio receiver. In this
case, set the TV to External Speaker.
✎
When Speaker Select is set to Ex ternal Speaker,
the volume and MUTE buttons will not op erate and
the sound settings will be limited.
✎
When Speaker Select is set to Ex ternal Speaker.
x
TV Speaker: Off, Externa l Speaker: On
✎
When Speaker Select is set to TV S peaker.
x
TV Speaker: On, External S peaker: On
✎
If there is no video signal, both speake rs will be mute.
✎
It's not available for TB300 series.
■Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.

¦Selecting the Sound Mode

t
When you set to Dual
fg
, the current sound mode is displayed
on the screen.
Audio
Type Dual
f
-
g
Default
A2
Stereo
Mono Mono Automatic
change
Stereo Stereo ↔ Mono
Dual Dual
f
↔ Dual
g
Dual
f
NICAM
Stereo
Mono Mono Automatic
change
Stereo Mono ↔ Stereo
Dual Mono ↔ Dual
f
Dual
g
Dual
f
✎
If the Stereo signal is weak and an au tomatic switching,
occurs, then switch to the Mono.
✎
Only activated in stereo sound signal.
✎
Only available when the input Sou rce is set to TV.