23
English
Basic Features

Picture Menu

¦Changing the Preset Picture Mode

MENU
m
→ Picture → Picture Mode → ENTER
E
Picture Mode
t
Select your preferred picture type.
✎
When connecting a PC, the Picture Mo de is only available
the Standard and Entert ain.
■Dynamic: Suitable for a bright room.
■Standard: Suitable for a normal environment.
■Movie: Suitable for watching movies in a dark room.
■Entertain: Suitable for watching movies and games.
✎
It is only available when connect ing a PC.

¦Adjusting Picture Settings

MENU
m
→ Picture → ENTER
E
Samsung MagicAngle
Adjust screen viewing Angle to optimize screen quality according
to your viewing position.
■Samsung MagicAngle: When viewing the screen at an
angle from below or above by setting the appropriate mode
for each position you can obtain a similar picture quality as
viewing the screen directly from the front.
x
Off: Select when viewing fro m the front position.
x
Lean back mode: Select when view ing from a slightly
lower position.
x
Standing Mode: Select when vi ewing from the upper
position.
■Mode: Adjust screen viewing angle.
✎
When Samsung MagicAngle i s set to Lean back mode
or Standing Mode, Gamma is not avail able.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x
In analogue TV, PC, AV modes of the PAL system, the
Tint (G/R) function is not availab le.
x
When connecting a PC, you can only make c hanges to
Backlight, Contrast, Brig htness and Sharpness.
x
Settings can be adjusted and stored for e ach external
device connected to the LED display.
x
Lowering picture brightness redu ces power
consumption.
Screen Adjustment
■Picture Size: Your cable box / satellite
receiver may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most of
the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
u
/
d
buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the
screen size.
✎
Adjusts the Zoom or Position by using
u
/
d
button.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, rig ht and centre of
the screen may cause image retention (scre en burn)
which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (720p / 1080i /
1080p) signals are inputted.
✎
Adjusts the Position by using
u
/
d
/
l
/
r
button.
✎
NOTE
x
Depending on the input source, the pi cture size options
may vary.
x
The available items may differ de pending on the
selected mode.
x
When connecting a PC, only 16:9 and 4:3 mode s can
be adjusted.
x
Settings can be adjusted and stored for e ach external
device connected to an input on the LED di splay.
x
If you use the Screen Fit function wi th HDMI 720p
input, 1 line will be cut at the top, bottom, left an d right
as in the overscan function.
■Zoom / Position:You can adjust picture size and position
by
u
/
d
/
l
/
r
button.
✎
It's only available when picture size is set a s Zoom
and Wide Zoom.
✎
In Wide Zoom mode, you can only use Positi on
adjustment.
✎
Reset: Reset the Zoom and Position to the d efault
settings.
■4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each
European country requires different picture size.
✎
Not available in HDMI , Component, and H DMI/DVI
mode.