Getting Started
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of
✎✎Plug & Play is available only when the Source List is set to TV.
✎✎Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 14).
1 | Selecting a language |
2 | Selecting Store Demo |
or Home Use |
3 | Selecting search |
options for auto tuning |
4 | ModeSetting the Clock |
5 | View the HDTV |
Connection Guide | |
6 | Enjoy your TV. |
Press the uor dbutton, then press the ENTEREbutton. Select | P |
the desired OSD (On Screen Display) language. | |
Press the lor rbutton, then press the ENTEREbutton. |
yy Select the Home Use mode. Store Demo Mode is for retail environments.
yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Press the uor dbutton, then press the ENTEREbutton. Select Air, Cable or Auto.
✎✎If you selected Cable, you’ll go to the cable system screen. Use the uor dbutton to select the correct cable signal format - STD, HRC, or IRC - and then press ENTERE. Most cable systems use STD. Select the correct cable signal format for both the Digital and Analog systems.
✎✎When done, select Start, and the press ENTERE. Set the Clock Mode automatically or manually.
yy Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
yy Manual: Allows you to manually set the current date and time (p.26). The connection method for the best HD screen quality is displayed.
Press the ENTEREbutton.
If You Want to Rerun Plug & Play...
MENUm→ Setup → Plug & Play → ENTERE
✎✎NOTE
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.
English 15