Y O U R N E W T V
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 13 – 22.
ŒAUDIO-VIDEO MONITOR OUTPUT jacks
Connect to the audio/video input jacks of a recording VCR.
Note: The Monitor Out does not operate in Component 1 or 2 modes.
´,¨,ˆAV INPUT jacks
Video and Audio signals from VCRs, DVD players and similar devices.
Note: The common jack of component 1 and AV2, component 2 and AV3 input jacks are exclusive relation with each other.
ˇCOMPONENT 1 INPUT jacks (480i/480p/1080i)
Connect to the audio and component output jacks of a DVD player or
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
•
ØCOMPONENT 2 INPUT jacks (480i/480p/1080i)
Connect to the audio and component output jacks of a DVD player or
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
•
∏VHF/UHF jack
Connect to an antenna or to a cable TV system.
”SUB-WOOFER SPEAKER
OUTPUT jack (TX-P3298HF/TX-P3098WHF/ TX-P2798HF)
Connect to the
’DVI AUDIO INPUT jacks (TX-P3298HF/TX-P3098WHF/ TX-P2798HF)
Receives the digital audio signals from a set top box.
˝DIGITAL INPUT (Digital
Visual Interface) jack
Receives the digital video signals from a set top box.
11
