INSTALLATION
English - 14
4
Connect a coaxial cable
between the ANTENNA
OUTterminal on the cable
box and the B–INterminal
on the RF (A/B) switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the “ANT IN”
terminal on the rear panel.
After you’ve made this connection, set the A/B switch to the “A” position for normalviewing. Set the A/B switch to the “B” position to view scrambled channels. (When you setthe A/B switch to “B”, you will need to tune your TV to the cable box’s output channel,which is usually channel 3 or 4.)
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch
TV Rear
Splitter
AA68-03644A-00Eng 6/23/05 2:33 PM Page 14