OPERATION

English - 26

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna)

and cable channels. After the available channels are memorized, use the CH and

CH buttons to scan through the channels. This eliminates the need to change

channels by entering the channel digits. There are three steps for memorizing channels:

selecting a broadcast source, memorizing the channels (automatic) and adding and

deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the

type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1
Press the MENU button.
Press the ▲ or ▼button to
select “Channel”, then press the
ENTER button.
2
Press the ▲ or ▼button to
select “Air/CATV”.
3
Press the œœ or √√button to
select “Air” (antenna), “STD”,
“HRC”, or “IRC” (all cable TV).
Move Enter Return
Channel
Auto program √√
Add/Delete √√
Fine tune : 00
Air/CATV : Air
Name : - - - -
Move Adjust Return
Channel
Auto program √√
Add/Delete √√
Fine tune : 00
Air/CATV œœAir √√
Name : - - - -
Move Adjust Return
Channel
Auto program √√
Add/Delete √√
Fine tune : 00
Air/CATV œœAir √√
Name : - - - -

œSTD, HRC and IRC identify

various types of cable TV

systems. Contact your local cable

company to identify the type of

cable system that exists in your

particular area.

continued...
AA68-03644A-00Eng 6/23/05 2:33 PM Page 26