OP E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button

Channel

 

 

 

 

 

 

 

 

Auto program

 

√

 

 

Add/Delete

 

√

 

 

Fine tune

 

:

00

 

 

 

 

 

Air/CATV

 

:

Air

 

 

Name

 

: - - - -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move

Enter

 

Return

2

Press the ▲ or ▼ button to select “Air/CATV”.

Channel

 

 

Auto program

 

 

√

 

 

Add/Delete

 

 

√

 

 

Fine tune

:

00

 

 

 

 

 

 

 

Air/CATV

œ

Air

√

 

 

 

Name

:

- - - -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move Adjust Return

3

Repeatedly press the œ or √button to cycle through these choic- es: “Air” (antenna) “STD”, “HRC” or “IRC” (all cable TV).

Press the EXIT button to exit the menu.

Channel

 

 

Auto program

 

 

√

 

 

Add/Delete

 

 

√

 

 

Fine tune

 

:

00

 

 

 

 

 

 

 

 

Air/CATV

 

œ

Air

√

 

 

 

Name

 

: - - - -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move

Adjust

 

Return

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next page).

26