![](/images/new-backgrounds/1137214/13721455x1.webp)
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~3 on previous page.
Labeling | : |
Press the MENU button, then press the CH ▼ but- ton twice to select “Channel,” then press the VOL + button.
2
Press the CH ▼ button to select “Auto program”.
Labeling | : | |
|
|
|
|
|
|
3
Press the VOL + button. The TV will begin memorizing all of the available channels.
▼ | The TV automatically cycles |
through all of the available channels and stores them in memory. This takes about one to two minutes.
Press the MENU button at any time to interrupt the memorization process and return to the Channel menu.
4
After all the available channels are stored, the Auto program menu reap- pears. Press the MENU button twice to exit.
3.6 CHAPTER THREE: TV OPERATION