LED TV

Getting Started

Accessories

Remote Control & Batteries (AAA x 2)

Holder-Wire stand

Owner’s Instructions

Power Cord
Warranty Card / Safety Guide (Not available in some locations)
Plug & Play

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.

Connecting the power cord and antenna. (refer to ‘Connections’)

Connections

yy For better picture and audio quality, connect to a digital device using an HDMI cable.

yy PC/DVI AUDIO IN input are not supported.

yy The picture may not display normally (if at all) or the audio may not work if an external

yy DIGITAL AUDIO OUT(OPTICAL) is not supported.

device that uses an older version of HDMI mode is connected to the TV. If such a problem

yy For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

occurs, ask the manufacturer of the external device about the HDMI version and, if out of

 

date, request an upgrade.

yy Connecting through the HDMI cable may not be supported depending on the PC.

yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a

yy If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

connection error may occur.yy SERVICE: Connector for service only.

 

Remote Control

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Turns the TV on and off.

Displays and selects the available video

sources.

 

user manual

Input Cables (Sold Separately)
Selecting a language

 

Plug & PlaySelect the desired OSD (On Screen

Select the OSD Language.

EnglishDisplay) language.
Language option may vary

Language

Indonesia
depending on areas.

 

 

d

 

TV Rear PanelPower Input
AV Device (1)Using an HDMI Cable (up to 1080p)

Press to directly access to channels.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

HDMIHDMI-DVIComponent

Composite (AV)

Coaxial (RF)

 

U Move E Enter

Selecting a Home Use mode
VHF/UHF Antenna
Blu-ray player / DVD / cable box / sat box

Alternately select Teletext ON, Double, Mix or OFF.

Returns to the previous channel.

 

 

Cuts off the sound temporarily.
Adjusts the volume.

 

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.

Always try do display any image on full screen, use TV set picture format menu for best possible match.

Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xxIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.
CountryCustomer Care CentreWeb Site
AUSTRALIA

1300 362 603

www.samsung.com/au/support

 

 

 

NEW ZEALAND0800 SAMSUNG (0800

www.samsung.com/nz/support

 

726 786)

 

 

 

 

CHINA

400-810-5858

www.samsung.com/cn/support

 

 

 

HONG KONG

(852) 3698 4698

www.samsung.com/hk/

 

 

support (Chinese)

 

 

www.samsung.com/hk_en/

 

 

support (English)

 

 

 

INDIA1800 3000 8282 - Toll Free

www.samsung.com/in/support

 

1800 266 8282 - Toll Free

 

 

 

 

INDONESIA

0800112888

www.samsung.com/id/support

 

021-56997777

 

 

 

 

JAPAN

0120-327-527

www.samsung.com/jp/support

 

 

 

MALAYSIA

1800-88-9999

www.samsung.com/my/support

 

 

 

PHILIPPINES1-800-10-7267864 [PLDT]

www.samsung.com/ph/support

 

1-800-8-7267864 [Globe

 

 

landline and Mobile]

 

 

02-4222111 [Other landline]

 

 

 

 

SINGAPORE1800-SAMSUNG (726-7864)

www.samsung.com/sg/support

 

 

 

THAILAND

0-2689-3232,

www.samsung.com/th/support

TV Controller (Panel Key)

 

Function menu

 

Down (Front)

MEDIA.P

 

 

m R

LeftRight

 

 

P

 

 

Return

 

 

 

 

Up (Rear)
TV ControllerRemote control sensor
Power on

Turns the TV on by pressing the controller in

 

 

 

 

 

 

• Select the Home Use mode.

 

 

Plug & Play

 

 

 

Select 'Home Use' when installing this TV in your home.

Store Demo mode is for retail
environments.

 

 

 

 

 

 

 

 

 

 

• When pressing TV controller, the

 

 

Store Demo

Home Use

function menu screen appears.

 

 

 

 

 

 

 

 

Select the Menu(m) and press

 

 

 

L Move E Enter

 

it more than 5 seconds using the

 

 

 

 

 

controller. The Store Demo mode

 

 

 

 

is set. Cancel the Store Demo by

 

 

 

 

 

 

 

 

selecting Source(

 

) and pressing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

it more than 5 seconds.

 

 

 

 

 

 

 

 

 

Selecting an Area

 

 

 

 

 

 

Press the ► / ENTEREbutton.

 

 

Plug & Play

 

 

 

Select Area.

 

 

 

 

 

Press the ▲ or ▼ button, then press

 

 

 

 

 

the ENTEREbutton to select the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate area.

Area

: Asia/Europe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E Enter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Store

or

CableMedia PlayUsing a USB Drive

PC

PC

Using an HDMI Cable or an HDMI to DVI Cable. Use the PC speakers for audio.
Displays the main on-screen menu.Views the Media Play. MEDIA.PQuickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

 

A

B

C

P.MODE: Selects the picture mode.

P.MODE

P.SIZE

SRS

P.SIZE: Selects the picture size.

 

 

 

SRS: Turns the SRS TruSurround on and off.

 

 

 

HDMI

D

Changes channels.

Displays channel lists on the screen. Selects the HDMI mode directly.

Displays information on the TV screen. Exits the menu. Use these buttons according to the direction on screen. Use these buttons in a specific feature.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.Installation with a wall-mount.

 

1800-29-3232

 

 

 

 

TAIWAN

0800-32-9999

www.samsung.com/tw/support

 

 

 

VIETNAM

1 800 588 889

www.samsung.com/vn/support

 

 

 

GEORGIA

0-800-555-555

www.samsung.com/support

 

standby mode.
Adjusting the volumeAdjusts the volume by moving the controller from
side to side when the power is on.

 

Selecting a channelSelects a channel by moving the controller up and

 

The channel search will start automatically.

Setting the Clock Set
AV Device (2)AV Device (3)
Using a Component Cable

 

Using Audio/Video
(up to 1080p)

 

Cables
Display Modes (HDMI/DVI Input) Optimal resolution is 1920 X 1080 @ 60 Hz.
Installing batteries (Battery size: AAA)

 

 

 

 

10 cm

 

10 cm

 

 

 

 

 

 

 

 

 

 

10 cm

 

 

 

10 cm 10 cm

 

 

 

10 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ARMENIA

0-800-05-555

www.samsung.com/support

 

 

 

AZERBAIJAN

088-55-55-555

www.samsung.com/support

 

 

 

UZBEKISTAN

8-10-800-500-55-500

www.samsung.com/support

 

 

 

KYRGYZSTAN

8-10-800-500-55-500

www.samsung.com/kz_ru/

 

 

support

 

 

 

TADJIKISTAN

8-10-800-500-55-500

www.samsung.com/support

 

 

 

MONGOLIA

+7-800-555-55-55

www.samsung.com/support

 

 

 

BELARUS

810-800-500-55-500

www.samsung.com/support

 

 

 

MOLDOVA

0-800-614-40

www.samsung.com/support

 

 

 

ALGERIA

021 36 11 00

www.samsung.com/n_africa/

 

 

support

 

 

 

PAKISTAN0800-Samsung (72678)

www.samsung.com/pk/support

 

 

 

TUNISIA

80-1000-12

www.samsung.com/n_africa/

 

 

support

 

 

 

 

down when the power is on.

 

 

 

 

Press the controller when the power is on, then the

Using the function menu

 

function menu screen appears. If you press it again,

 

 

 

 

the function menu screen disappears.

 

 

 

 

Selects the Menu(m) by moving the controller in
Using the Menu (m)

 

the function menu screen. The OSD(On Screen

 

 

 

 

Display) of your TV’s feature appears.

 

 

 

 

Selects the Source(

 

) by moving the controller in

 

 

 

 

 

Selecting the Source (

 

 

)

the function menu screen. The Source List screen

 

 

 

 

 

appears.

 

 

 

 

 

 

Selects the MEDIA.P by moving the controller in

Selecting the Media Play

 

the function menu screen. The Media Play main

 

 

 

 

screen appears.

 

 

Power Off ( P)

 

Selects the Power Off (P) to turn the TV off by

 

moving the controller in the function menu screen.

 

 

 

 

Exits the menu when pressing the controller more than 1 second.

When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

 

 

 

 

 

 

Press the ◄ or ► button to select Day,

 

 

 

Clock Set

 

 

 

Set current date and time

 

 

 

Month, Year, Hour and Minute.

 

 

 

 

 

 

Set these by pressing the ▲ / ▼ / ◄

 

Day

 

 

Month

Year

 

 

d

 

 

 

 

 

/ ► button, and press the ENTERE

01

 

 

01

2012

 

button to go next step.

 

d

 

 

 

 

Hour

 

 

Minute

 

 

 

23

 

 

00

 

 

 

 

 

 

 

 

 

L Move

U Adjust

E Enter mSkip

 

 

 

 

 

 

 

 

 

Viewing the HD Connection GuideThe connection method for the best HD screen quality is displayed.

Enjoy your TV.Press the ENTEREbutton.
Blu-ray player

 

VCR

 

 

 

 

 

 

 

 

 

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

Changing the Input Source

 

 

 

 

 

 

 

 

 

 

 

 

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
Source List
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
Use to select TV or other external input sources such as DVD / Blu-When connecting a PC to the HDMI IN 1(DVI) port with HDMI
ray players / cable box / STB satellite receiver connected to the TV.cable, you should set the TV to PC mode under Edit Name.

When connecting a PC to the HDMI IN 1(DVI) port with HDMI

1. Press the SOURCE button.
to DVI cable, you should set the TV to DVI PC mode under Edit

 

 

 

 

 

 

 

2. Select a desired external input source.Name.
TV / AV / Component / HDMI1/DVI / HDMI2When connecting an AV devices to the HDMI IN 1(DVI) port
You can only choose external devices that are connected to thewith HDMI to DVI cable, you should set the TV to DVI mode
TV. In the Source List, connected inputs will be highlighted.under Edit Name.
How to use Edit Name
Information
You can see detailed information about the selected external device.
Edit Name lets you associate a device name to an input source. To
Information only available for the current connected source.
access Edit Name, press the TOOLS button in Source List. The

 

 

 

 

following selections appear under Edit Name:

 

 

 

 

 

 

Horizontal

Vertical

Pixel Clock

Sync Polarity

Mode

Resolution

Frequency

Frequency

Frequency

(H / V)

 

 

(KHz)

(Hz)

(MHz)

 

 

 

IBM

640 x 350

31.469

70.086

25.175

+/-

720 x 400

31.469

70.087

28.322

-/+

 

 

640 x 480

35.000

66.667

30.240

-/-

MAC

832 x 624

49.726

74.551

57.284

-/-

 

1152 x 870

68.681

75.062

100.000

-/-

 

640 x 480

31.469

59.940

25.175

-/-

 

640 x 480

37.861

72.809

31.500

-/-

 

640 x 480

37.500

75.000

31.500

-/-

 

800 x 600

37.879

60.317

40.000

+/+

 

800 x 600

48.077

72.188

50.000

+/+

 

800 x 600

46.875

75.000

49.500

+/+

 

1024 x 768

48.363

60.004

65.000

-/-

 

1024 x 768

56.476

70.069

75.000

-/-

 

1024 x 768

60.023

75.029

78.750

+/+

VESA DMT

1152 x 864

67.500

75.000

108.000

+/+

 

1280 x 720

45.000

60.000

74.250

+/+

 

1280 x 800

49.702

59.810

83.500

-/+

 

1280 x 1024

63.981

60.020

108.000

+/+

 

1280 x 1024

79.976

75.025

135.000

+/+

 

1366 x 768

47.712

59.790

85.500

+/+

 

1440 x 900

55.935

59.887

106.500

-/+

 

1600 x 900RB

60.000

60.000

108.000

+/+

 

1680 x 1050

65.290

59.954

146.250

-/+

 

1920 x 1080

67.500

60.000

148.500

+/+

NOTExxUse the remote control within 23 feet from TV.

xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.

xxThe product colour and shape may vary depending on the model.
BN68-05733N-03

- 1 -

- 2 -

- 3 -

- 4 -

Channel Menu

❑ Seeing Channels
Channel List

Select a channel in the All Channels, Added Channels, Favourites or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTEREbutton. Then you can watch the selected channel.

a5

Air

a6

♥ TV #6

Manual StoreScans for a channel manually and stores in the TV.If a channel is locked, the PIN input window appears.According to channel source, Manual Store may be supported.

Programme, Colour System, Sound System, Channel, Search, Store: If there is abnormal sound or no sound, reselect the sound standard required.

Channel mode

xxP (Programme): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by

Channel Mode
Channels will be switched within the favourite or memorised channel list.Added Channels: Shows all added channels.Favourite Ch.: Shows all favourite channels.
Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the

Picture OptionsColour Tone (Cool / Standard / Warm1 / Warm2)Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnifies the picture size more than 4:3. Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.

Sound Menu

Mode tStandard: Selects the normal sound mode.Music: Emphasizes music over voices.Movie: Provides the best sound for movies.Clear Voice: Emphasizes voices over other sounds.

Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

Equalizer

Setup Menu

❑ Setting the Time
Time
The current time will appear every time you press the INFO button.Clock Set: Set the Day, Month, Year, Hour, Minute. ■Sleep Timer tAutomatically shuts off the TV after a preset period of time. (30,
Eco Solution

 

 

 

 

 

Support Menu

 

 

 

 

■ Energy Saving t(Off / Low / Medium / High / Picture

 

 

 

 

 

 

 

 

 

Off) : This adjusts the brightness of the TV in order to reduce
Self Diagnosis
power consumption. If you select Picture Off, the screen is
Picture Test: Use to check for picture problems. If the problem
turned off, but the sound remains on. Press any button except
volume button to turn on the screen.continues to occur, check the colour pattern.
No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoidSound Test: Use the built-in melody sound to check for sound
unnecessary energy consumption, set how long you want the TVproblems.
to remain on if it’s not receiving a signal.Reset: Reset all settings to the factory defaults.
Disabled when the PC is in power saving mode.The PIN input screen appears before the setup screen.
Auto Power Off (Off / On): The TV will be automatically turnedEnter your 4-digit PIN. Change the PIN using the Change
off when no user operation is received for 4 hours.PIN option.

Added

a7

 

♥ TV #7

Channels

a8

 

Air

a9

 

Air

a9

 

♥ TV #9

 

 

 

a10

 

Air

 

a11

 

♥ TV #11

 

a12

 

♥ TV #12

 

 

Zoom

 

Select TTools

 

 

 

All Channels: Shows all currently available channels.

Added Channels: Shows all added channels.

*Favourites: Shows all favourite channels.

Programmed: Shows all currently reserved Programmes. Using the remote control buttons with the Channel List.

xxGreen (Zoom): Enlarges or shrinks a channel number.

xxYellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.

xxT(Tools): Displays the Channel List option menu. (The Options menus may differ depending on the situation.)

Channel Status Display iconsIconsOperationscA channel selected.*A channel set as a favourites. \ A locked channel.) A reserved programme.
❑ Retuning Channels
Area
You can change the desired area.
Auto Store
(depending on the country)Scans for a channel automatically and stores in the TV.

Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears.

entering the position number in this mode.

xxC (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Channel List Option Menu t

Set each channel using the Channel List menu options (Add/ Delete, Add to Favourites/Delete from Favourites, Timer Viewing, Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect All, Auto Store). Option menu items may differ depending on the channel status.

Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.

Add / Delete: Delete or add a channel to display the channels you want.All deleted channels will be shown on the All Channels menu.A gray-Coloured channel indicates the channel has been deleted.The Add menu only appears for deleted channels.

Delete a channel from the Added Channels or Favourites menu in the same manner.

Add to Favourites / Delete from Favourites t: Set channels you watch frequently as favourites

Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time first to use this function.

Edit Channel Name: Assign your own channel name.

Sort: This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.

This function is available only when the Channel Lock is set to On.

The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

Select All / Deselect All: You can select or deselect all channels in the channel list.

Auto Store: Scans for a channel automatically and stores in the TV.
channel banner.To reset the fine-tuning, select Reset.

Picture Menu

Mode t
Select your preferred picture type.Dynamic: Suitable for a bright room.Standard: Suitable for a normal environment.Movie: Suitable for watching movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
Advanced Settings
(available in Standard / Movie mode)Compared to previous models, new Samsung TVs have a more precise picture.

Colour Space (Auto / Native): Adjusts the range of colours available to create the image.

White Balance: Adjust the colour temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.

Reset: Resets the White Balance to its default settings. ■Gamma: Adjusts the primary colour intensity.

Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.

Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

Flesh Tone: Emphasize pink “Flesh Tone”.

Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.

Only available in Standard mode.
4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

NOTE

xxAfter selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄, ► button.

xxDepending on the input source, the picture size options may vary.xxThe available items may differ depending on the selected mode.

xxSettings can be adjusted and stored for each external device connected to an input on the TV.

xxIf you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

When the signal is weak, try other options until the best picture is displayed.

HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

Film Mode (Off / Auto): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Enhances motion in fast moving scenes.

LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.

Picture Reset
Resets your current picture mode to its default settings.

Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.

(standard sound mode only)Balance: Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

Reset: Resets the equalizer to its default settings.
SRS TruSurround HD t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

Auto Volume

Because each broadcasting station has its own signal conditions, the volume may fluctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Selecting the Sound Mode tWhen you set to Dual l-ll, the current sound mode is displayed on the screen.

 

Audio Type

Dual I-II

Default

 

Mono

Mono

Automatic
A2 StereoStereoStereo ↔ Monochange

 

Dual

Dual I ↔ Dual II

Dual I

 

Mono

Mono

Automatic

NICAM

Stereo

Mono ↔ Stereo

change

Stereo

Dual

Mono ↔ Dual I

Dual I

 

Dual II

 

 

 

If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.

Only activated in stereo sound signal.This function is available for all input sources.
Sound Reset
Reset All: Reset all sound settings to the factory defaults.
60, 90, 120, 150 and 180 minutes). To cancel Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the clock first.

On Timer / Off Timer: Set the hour, minute and Activate / Inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level.

Contents: When the On Timer is activated, you can turn on a specific channel or play back contents such as photo or audio files.

-TV/USB: Select TV or USB. (Make sure that an USB device is connected to your TV.)

-Antenna: Displays the current antenna source.-Channel: Select the desired channel.-Music/Photo: Select the folder containing MP3/JPEG files on the USB device.

The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000.

The media may not be playing smoothly when using the device lower than USB 2.0.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer.

SecurityThe PIN input screen appears before the setup screen.

Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

xxChild Lock (Off / On): Lock channels in Channel List, to prevent unauthorized users, such as children, from watching unsuitable programme.

Only available when the Input source is set to TV. xxChange PIN: Change your password required to set up the TV.

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE 8 2 4 POWER (on).

Language
Set the menu language.Select Language and press the ENTEREbutton.
Auto Protection Time

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

General

Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game mode.

xxPrecautions and limitations for game mode

--To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

--If you display the TV menu in Game Mode, the screen shakes slightly.xxGame Mode is not available in TV mode.

xxAfter connecting the game console, set Game Mode to On to prevent poor picture quality. Unfortunately, you may notice reduced picture quality

Melody: Set so that a melody plays when the TV is turned Off, Low, Medium and High.

The Melody does not play.--When no sound is output from the TV because the MUTE button has been pressed.

--When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.

--When the TV is turned off by Sleep Timer function.
Software Upgrade

Software Upgrade can be performed by downloading the latest firmware from “www.samsung.com” to a USB memory device.

HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.

Media Play

Enjoy photos, music and/or movie files saved on a

 

USB Mass Storage Class (MSC) device.MEDIA.P

 

❑ Connecting a USB Device
1.Turn on your TV.

2.Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV.

3.When USB is connected to the TV, you can select Media Play.

- 5 -

- 6 -

- 7 -

- 8 -

[UH6003-ME]BN68-05733N-03ENG.indb 1

 

 

2014-05-23 ￿￿ 1:26:03