¦Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept.
NWhen using a stand or
•If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
•If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation.
NThe appearance may differ depending on the product.
When installing the product with a stand |
|
|
| When installing the product with a | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 cm |
|
|
|
|
|
|
| 10 cm | ||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| ||||
10 cm |
| 10 cm |
| 10 cm |
|
|
| 10 cm | |||||
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 cm
¦Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the
■To avoid the TV from falling:
1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.
N You may need additional material such as an anchor depending on the type of wall.
N Since the necessary clamps, screws, and string are not supplied, please |
|
purchase these additionally. | Wall |
|
2.Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
N Screw Specifications
For a 32 ~ 55 Inch LED TV: M8 X L10
3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.
N Install the TV near to the wall so that it does not fall backwards.
N It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
N Untie the string before moving the TV.
4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.
Wall
English - 70