Charging the Battery
If the red LED blinks every 2 seconds, charge the battery as shown below. The orange LED will blink every second when battery charging is in progress. The green LED will blink every 2 seconds when the charging is finished. (It takes about 30 minutes to fully charge the battery that is dead; however, the time required to charge it to full capacity may vary depending on the battery level and the voltage of the supplied power.)
SAMSUNG TV |
PC |
•• Powering on / off the 3D glasses: Put on the 3D glasses. The glasses will automatically power on and the green LED will be lit for 3 seconds. To power off the glasses, take off the glasses. Several minutes later, the glasses will automatically power off and the red LED will be lit for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.)
•• Operating range
Recommended pairing distance
2~6 m
50 cm
USB PORT | Note Book |
| |
| Micro USB Cable |
Performing 3D Active Glasses pairing
What is Pairing? Pairing is a process that prepares devices to exchange data so that, in operation, the devices can transmit and exchange data instantly.
•• Pairing: Press the pairing button on the 3D glasses for more than 1 seconds. Pairing will start.
✎✎ It might take 10 ~15 seconds to reconnect the glasses. There is no power off button on these glasses.
Recommended viewing distance
Recommended viewing distance | 2~6m |
|
|
Recommended pairing distance | 50 cm or less |
✎✎ The working distance depends on obstacles (a person, metal, walls, etc.) or electromagnetic waves.
✎✎ Note that if you take off the 3D glasses while viewing 3D video and the 3D mode remains enabled on your TV, it will take 5 minutes for the 3D glasses to power off.
✎✎ If the glasses do not operate immediately when you put them on while the TV is in 3D mode, put the glasses on again.
✎✎ This product is rechargeable. It may not operate due to the dead battery when you attempt to use it for the first time. In this case, charge the battery.
