Samsung UN32EH5000 user manual Still image warning, Securing the Installation Space, Channel List

LED TV

user manual

Getting Started

Accessories

•	Remote Control & Batteries (AAA x 2)	•	Owner’s Instructions
•	Warranty Card / Safety Guide	•	Power Cord

Input Cables (Sold Separately)

•	RS232	•	Component
•	Audio
		•	Composite (AV)
•	HDMI
		•	Coaxial (RF)
•	HDMI-DVI

✎When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the fi rst time, a sequence of on-screen prompts will assist in confi guring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.

✎Connecting the power cord and antenna. (refer to ‘Connections’)

Selecting a language

Connections

y For better picture and audio quality, connect to a digital device using an HDMI cable.		y	PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
y The picture may not display normally (if at all) or the audio may not work if an external		y	For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
device that uses an older version of HDMI mode is connected to the TV. If such a problem		y	Connecting through the HDMI cable may not be supported depending on the PC.
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.		y	If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
y Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display or a		y	EX-LINK: Connector for service only.
connection error may occur.
	AV Device (1)
Using a HDMI Cable (up to 1080p)			y The side panel may differ depending on the model.
HDMI OUT
			Power Input

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

	Displays and selects the available video
	sources.
Turns the TV on and off.	Turns the remote control light on or off. When
	on, the buttons become illuminated for a
	moment when pressed. (Using the remote
	control with this button set to On will reduce
Press to directly access to channels.	the battery usage time.)

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifi cations may be changed without notice.

Still image warning

Avoid displaying still images (such as jpeg picture fi les) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

•Avoid displaying the same TV channel for long periods.

•Always try to display any image on full screen, use TV set picture format menu for best possible match.

•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

•Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fi re or a problem with the product due to an increase in the internal temperature of the product.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country	Customer Care Center 	Web Site
MEXICO	01-800-SAMSUNG (726-7864)	www.samsung.com
	Dirección: GENERAL MARIANO ESCOBEDO 476 PISO 8
	COL. ANZURES, DELEGACIÓN MIGUEL HIDALGO MÉXICO, DISTRITO
	FEDERAL C.P. 11590
ARGENTINE	0800 333 3733	www.samsung.com.ar
URUGUAY	000 405 437 33	www.samsung.com
PARAGUAY	009 800 542 0001	www.samsung.com.py
BRAZIL	0800-124-421 (Demais cidades	www.samsung.com.br
	e regiões)
	4004-0000 (Capitais e grandes
	centros)
CHILE	800-SAMSUNG(726-7864)	www.samsung.com/cl
BOLIVIA	800-10-7260	www.samsung.com
COLOMBIA	01 8000 112 112	www.samsung.com/co
	Bogotá 600 12 72
COSTA RICA	0-800-507-7267	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
DOMINICA	1-800-751-2676	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
ECUADOR	1-800-10-7267	www.samsung.com/latin (Spanish)

✎ Check the cable before plug-in
Cable	Ports
HDMI

USB

Optical

Do not plug cable upside down.

Be sure to check before plug-in.

TV Controller (Panel Key)

Function menu

MEDIA.P

m R

P

Return

TV Controller

	Plug & Play				Select the desired OSD (On Screen
					Display) language.
Select Language of the OSD.		English
Language		FrançaisEspañol
		U Move	E Enter
			
				
		Selecting a Home Use mode
					•	Select the Home Use mode. Store
	Plug & Play
Select ‘Home Use’ when installing this TV in your home.						Demo mode is for retail environments.
					•	When pressing TV controller, the
			
						function menu screen appears. Select
	Store Demo	Home Use				the MENU(m) and press it more than 5
						seconds using the controller. The Store
		L Move	E Enter			Demo mode is set. Cancel the Store
						Demo by selecting Source List(s)
						and pressing it more than 5 seconds.
		Selecting an antenna
	Plug & Play				In Cable mode, you can select the correct
Select the Antenna source to memorize.					signal source among STD, HRC, and IRC
					by pressing the ▲, ▼, ◄ or ► button.
Air			Start
			Start

Blu-ray player / DVD / cable box /

TV Side Panel

sat box

DVI OUT

TV Rear Panel

Audio Device (1)

HDMI OUT

Using an Audio (Analog) Cable

R

AUDIO IN

PC

W

R-AUDIO-L

DVD / Home Theater

PC

Using a HDMI (to DVI) Cable

VHF/UHF Antenna

or

Media Play

R

W

YR

R

W

R

B

GR

ANT OUT

Using a USB Drive

Cable

R

W

Y

R

W

R

B

RG

Press to select additional channels (digital) being			Returns to the previous channel.
broadcasted by the same station. For example,
to select channel ‘54-3’, press ‘54’, then press			Cuts off the sound temporarily.
‘-’ and ‘3’.
Adjusts the volume.			Changes channels.
Displays the channel list on the screen.			Displays the main on-screen menu.
Views the Media Play.	MEDIA.P	SLEEP	Automatically shuts off the TV at a preset
			time.
Quickly select frequently used functions.			Displays information on the TV screen.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu. Exit the menu.

	Use these buttons according to the
P.SIZE: Lets you choose the picture size.	direction on screen.
MTS: Press to choose stereo, mono or	Use these buttons in a specifi c feature.
Separate Audio Program (SAP broadcast).

CC: Controls the caption decoder.

✎When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat hot.

		www.samsung.com/latin_en (English)
EL SALVADOR	800-6225	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
GUATEMALA	1-800-299-0013	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
HONDURAS	800-27919267	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
JAMAICA	1-800-234-7267	www.samsung.com
NICARAGUA	001-800-5077267	www.samsung.com/latin (Spanish)

Cable
Auto		Start
		
		
U Move	E Enter	mSkip
		
	Setting the Clock Mode

AV Device (2)	AV Device (3)
Using an Audio/Video	Using a Component Cable					Audio Device (2)
	(up to 1080p)
					Using an Optical (Digital) Cable
AUDIO OUT VIDEO OUT	AUDIO OUT	COMPONENT OUT			OPTICAL
R-AUDIO-L	R-AUDIO-L
		PR	PB	Y

Display Modes (HDMI/DVI Input)

Optimal resolution

Installing batteries (Battery size: AAA)

Installation with a stand.			Installation with a wall-mount.
4inches	4inches		4inches	4inches
		4inches			4inches
				4inches

		www.samsung.com/latin_en (English)
PANAMA	800-7267	www.samsung.com/latin (Spanish)
		www.samsung.com/latin_en (English)
PERU	0-800-777-08	www.samsung.com/pe
PUERTO RICO	1-800-682-3180	www.samsung.com
TRINIDAD &	1-800-SAMSUNG (726-7864)	www.samsung.com
TOBAGO
VENEZUELA	0-800-100-5303	www.samsung.com/ve

Power on

Adjusting the volume

Selecting a channel

Remote control sensor

Turns the TV on by pressing the controller in standby mode.

Adjusts the volume by moving the controller from side to side when the power is on.

Selects a channel by moving the controller up and down when the power is on.

	Plug & Play		Set the Clock Mode automatically or
Set the Clock Mode.			manually.
			•	If you select the Auto, set the
	
				DST(Daylight Saving Time).
Clock Mode		: Auto
			•	On the DST screen, press ENTERE,

then select whether to turn DST

(Daylight Savings Time) on or off. Select

E Enter m Skip the time zone where you live.

		Digital Audio System
VCR	Blu-ray player
		■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Changing the Input Source
		Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
		/ Blu-ray / HD DVD / DMA: Name the device connected to the
Source List		input jacks to make your input source selection easier.
		✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI

4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz

		Horizontal	Vertical	Pixel Clock	Sync
Mode	Resolution	Frequency		Frequency	Polarity	1366 x 768	1920 x 1080
			Frequency (Hz)
		(KHz)		(MHz)	(H / V)
IBM	640 x 350	31,469	70,086	25,175	+/-	c	c
	720 x 400	31,469	70,087	28,322	-/+	c	c
	640 x 480	35,000	66,667	30,240	-/-	c	c
MAC	832 x 624	49,726	74,551	57,284	-/-	c	c
	1152 x 870	68,681	75,062	100,000	-/-		c
	640 x 480	31,469	59,940	25,175	-/-	c	c
	640 x 480	37,861	72,809	31,500	-/-	c	c

(Sólo Mexico)

IMPORTADO POR : SAMSUNG ELECTRONICS MÉXICO S.A. DE C.V.

GENERAL MARIANO ESCOBEDO 476 PISO 8

COL. ANZURES, DELEGACIÓN MIGUEL HIDALGO MÉXICO, DISTRITO FEDERAL C.P. 11590

TEL : 01 (55) 5747-5100 / 01 800 726 7864

Using the function menu

Selecting the Media Play

Selecting the MENU (m)

Selecting the Source List (s)

Power Off (P)

Press the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears.

Selects the MEDIA.P by moving the controller in the function menu screen. The Media Play main screen appears.

Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears.

Selects the Source List (s) by moving the controller in the function menu screen. The Source List screen appears.

Selects the Power Off (P) to turn the TV off by moving the controller in the function menu screen.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTEREbutton.

Use to select TV or an external input source such as a DVD player /	cable, you should set the TV to PC mode under Edit Name.
Blu-ray player / cable box / STB satellite receiver.
	✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI
1. Press the SOURCE button.
	to DVI cable, you should set the TV to DVI PC mode under Edit
2. Select a desired external input source.	Name.
	✎ When connecting an AV devices to the HDMI IN 1(DVI) port
■ TV / AV / Component / HDMI1/DVI / HDMI2
	with HDMI to DVI cable, you should set the TV to DVI mode
✎ You can only choose external devices that are connected to the
	under Edit Name.
TV. In the Source List, connected inputs will be highlighted.
	Information
How to use Edit Name	You can see detailed information about the connected external
Edit Name lets you associate a device name to an input source. To	device.
access Edit Name, press the TOOLS button in Source List. The

	640 x 480	37,500	75,000	31,500	-/-	c	c
	800 x 600	37,879	60,317	40,000	+/+	c	c
	800 x 600	48,077	72,188	50,000	+/+	c	c
	800 x 600	46,875	75,000	49,500	+/+	c	c
	1024 x 768	48,363	60,004	65,000	-/-	c	c
	1024 x 768	56,476	70,069	75,000	-/-	c	c
	1024 x 768	60,023	75,029	78,750	+/+	c	c
VESA DMT	1152 x 864	67,500	75,000	108,000	+/+		c
	1280 x 720	45,000	60,000	74,250	+/+	c	c
	1280 x 800	49,702	59,810	83,500	-/+		c
	1280 x 1024	63,981	60,020	108,000	+/+		c
	1280 x 1024	79,976	75,025	135,000	+/+		c
	1366 x 768	47,712	59,790	85,500	+/+	c	c
	1440 x 900	55,935	59,887	106,500	-/+		c
	1600 x 900RB	60,000	60,000	108,000	+/+		c
	1680 x 1050	65,290	59,954	146,250	-/+		c
	1920 x 1080	67,500	60,000	148,500	+/+		c

✎NOTE

xUse the remote control within 23 feet from TV.

xBright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.

xThe Color and shape may vary depending on the model.

BN68-04499D-01	© 2012 Samsung Electronics Co., Ltd. All rights reserved.
	- 1 -

✎Exits the menu when pressing the controller more than 1 second.

- 2 -

following selections appear under Edit Name:

- 3 -

- 4 -

Channel Menu

❑Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for digital broadcasts. Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲

/▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.

	6	Air
Added	6-1	♥ TV #6
	7-1	♥ TV #7
Channels
	9	Air
	8	Air
	9-1	♥ TV #9
	10	Air
	10-1	♥ TV #10
	11-1	♥ TV #11
Air	' Zoom	' Select TTools ► Next Program

■ All Channels: Shows all currently available channels.

■ Added Channels: Shows all added channels.

■* Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved programs.

✎Using the remote control buttons with the Channel List

xGreen (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.

xT (Tools): Displays the Channel List option menu. (The Options menus may differ depending on the situation.)

Channel Status Display icons

IconsOperations

c A channel selected.

* A channel set as a Favorite.

)	A reserved program.
(	A program currently being broadcast.

❑Memorizing channels

Antenna (Air / Cable) t

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

✎When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

✎After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

✎Press the ENTERE button to stop the channel store during

Auto Program.

How to Stop Auto Programming

1.Press the ENTERE button.

2.A message will ask Stop Auto Program? Select Yes by pressing the ◄ or ► button.

3.Press the ENTERE button.

❑Other Features

Clear Scrambled Channel

This function fi lters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

✎Press the ENTERE button to stop the Clear Scrambled Channel.

✎This function is only available in Cable mode.

Channel List

Channel List Option Menu t

Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.

■Add / Delete: Delete or add a channel to display the channels you want.

✎All deleted channels will be shown on the All Channels menu.

✎A gray-colored channel indicates the channel has been deleted.

✎The Add menu only appears for deleted channels.

✎Delete a channel from the Added Channels or Favorite menu in the same manner.

■Add to Favorite / Delete from Favorite t: Set channels you watch frequently as Favorites.

■Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time fi rst to use this function.

✎Only memorized channels can be reserved.

✎Reserved programs will be displayed in the Programmed menu.

✎When a digital channel is selected, press the ► (Next Program) button to view the digital program. If you select the ENTERE(Schedule) button on the next program, you can set Timer Viewing directly.

■Channel Name Edit (analog channels only): Assign your own channel name.

■Select All: Select all the channels in the channel list.

■Deselect All: Deselect all the selected channels.

✎You can only select Deselect All when one or more channels are selected.

■Auto Program: Scans for a channel automatically and stores in the TV.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to watch.

■Change Info: Change a show you have reserved to watch.

■Cancel Schedules: Cancel a show you have reserved to watch.

■Information: Display a show you have reserved to watch. (You can also change the reservation Information.)

■Select All / Deselect All: You can select or deselect all channels in the channel list.

Channel Mode

Change the channel mode directly between Added Channels and Favorite Channels.

✎The Favorite Channels is enabled only when you set Add to Favorite.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to fi ne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fi ne tune the channel manually.

✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎To reset the fine-tuning, select Reset.

Picture Menu

Mode t

Select your preferred picture type.

✎When connecting a PC, you can only select Entertain and Standard.

■Dynamic: Suitable for a bright room.

■Standard: Suitable for a normal environment.

■Movie: Suitable for watching movies in a dark room.

■Entertain: Suitable for watching movies and games. ✎ Only available when connecting a PC.

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness

Advanced Settings

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a more precise picture.

✎When connecting a PC, you can only make changes to Gamma and White Balance.

■Color Space (Auto / Native): Adjusts the range of colors available to create the image.

■White Balance: Adjusts the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

■Gamma: Adjusts the primary color intensity.

■Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.

■Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■Flesh Tone: Emphasize pink “fl esh tone”.

■Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.

✎ Available in Standard mode only.

Picture Options

✎When connecting a PC, you can only make changes to the Color Tone, Size and HDMI Black Level.

■Color Tone (Cool / Standard / Warm1 / Warm2)

✎Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

■Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnifi cation.

Zoom2: Use for a stronger magnifi cation.

Wide Fit: Enlarges the aspect ratio of the picture to fi t the entire screen.

4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit (DTV): Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

✎Settings can be adjusted and stored for each external device you have connected to an input on the TV.

✎Picture Sizes available by Input Source:

Input Source	Picture Size
ATV, AV, Component (480i, 480p)	16:9, Zoom1, Zoom2, 4:3
DTV(1080i, 1080p), Component
(1080i, 1080p), HDMI (720p, 1080i,	16:9, Wide Fit, 4:3, Screen Fit
1080p)

■Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎When the signal is weak, try other options until the best picture is displayed.

■HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

✎Available only in HDMI mode (RGB signals).

■Film Mode (Off / Auto): Sets the TV to automatically sense and process fi lm signals from all sources and adjusts the picture for optimum quality.

✎Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.

Picture Reset

Resets your current picture mode to its default settings.

■Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.

	■ Audio Delay: Lets you correct timing mismatches between the
Sound Menu
		audio track and the video when you are watching the TV and
		listening to digital audio output from the TV through an external
Mode t		device such as an AV receiver. When you select Audio Delay, a
		slider appears. Use the left and right arrow buttons to adjust the
■ Standard: Selects the normal sound mode.
		slider. Press ENTERE when done (0ms ~ 250ms).
■ Music: Emphasizes music over voices.	Speaker Select
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voices over other sounds.	■ Speaker Select (External Speaker / TV Speaker): If you are
■ Amplify: Increase the intensity of high-frequency sounds to allow a		listening to the sound track of a broadcast or movie through an
better listening experience for the hearing impaired.		external receiver, you may hear a sound echo caused by the
Equalizer		difference in decoding speed between the TV’s speakers and the
		speakers attached to your audio receiver. If this occurs, set the TV
(standard sound mode only)		to External Speaker.
		✎ When you set Speaker Select to External Speaker, the
■ Balance L/R: Adjusts the balance between the right and left
		TV’s speakers are turned off. You will hear sound through the
speaker.		external speakers only. When you set Speaker Select to TV
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):		Speaker both the TV’s speakers and the external speakers
Adjusts the level of specifi c bandwidth frequencies.		are on. You will hear sound through both.
■ Reset: Resets the equalizer to its default settings.		✎ When Speaker Select is set to External Speaker, the
SRS TruSurround HD		VOLUME and MUTE buttons will not operate and the sound
		settings will be limited.
(standard sound mode only)		✎ If there is no video signal, both the TV’s speakers and the
SRS TruSurround HD is a patented SRS technology that solves the		external speakers will be mute.
problem of playing 5.1 multichannel content over two speakers.	Sound Reset
TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal	■ Reset All: Resets all sound settings to the factory defaults.
television speakers. It is fully compatible with all multichannel formats.
Preferred Language		Setup Menu
(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of	❑ Setting the Time
many audio tracks (for example, simultaneous translations of the
program into foreign languages).	Time
✎ You can only select a language from among the ones being
	✎ The current time will appear every time you press the INFO
broadcasted.
Multi-Track Sound (MTS)		button.
	■ Clock: Setting the clock is for using various timer features of the
(analog channels only)		TV.
■ Mono: Choose for channels that are broadcasting in mono or if		✎ If you disconnect the power cord, you have to set the clock
		again.
you are having diffi culty receiving a stereo signal.
		Clock Mode: Set the current time manually or automatically.
■ Stereo: Choose for channels that are broadcasting in stereo.
■ SAP: Choose to listen to the Separate Audio Program, which is		Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
usually a foreign-language translation.		✎ Available only when Clock Mode is set to Manual.
✎ Depending on the program being broadcast, you can listen to		Time Zone: Select your time zone.
Mono, Stereo or SAP.		DST (Daylight Saving Time): Switches the DST (Daylight Saving
Auto Volume		Time) function on or off.
		✎ DST and Time Zone function is only available when the
Because each broadcasting station has its own signal conditions,		Clock Mode is set to Auto.
the volume may fl uctuate each time channel is changed. This feature	■ Sleep Timer t
lets you automatically adjust the volume of the desired channel by		Automatically shuts off the TV after a preset period of time. (30,
lowering the sound output when the modulation signal is high or by
		60, 90, 120, 150 and 180 minutes).
raising the sound output when the modulation signal is low.
		✎ To cancel the Sleep Timer, select Off.
SPDIF Output
	Timer 1 / Timer 2 / Timer 3
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the	Three different on / off timer settings can be made. You must set the
back of the TV to a digital audio in jack on a receiver or home theater.	clock fi rst.
■ Audio Format: You can select the Digital Audio output (SPDIF)	■ On Time / Off Time: Set the hour, minute, am/pm and Activate /
format. The available Digital Audio output (SPDIF) format may differ		Inactivate. (To activate the timer with the setting you have chosen,
depending on the input source.		set to Activate.)
✎ By connecting the TV to a receiver or home theater with Dolby	■ Volume: Set the desired volume level.
Digital and 5.1ch speakers and selecting Dolby Digital, you
can maximize your interactive 3D sound experience.

■Contents: When the On Time is activated, you can turn on a specifi c channel or play back contents such as photo or audio fi les.

-TV/USB: Select TV or USB. (Make sure that an USB device is connected to your TV.)

-Antenna: Displays the current antenna source.

-Channel: Select the desired channel.

-Music/Photo: Select the folder containing MP3/JPEG fi les on the USB device.

✎The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000.

✎The media may not be playing smoothly when using the device lower than USB 2.0.

■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.

❑Other Features

Program Rating Lock

The Program Rating Lock feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identifi cation number) before any of the Program Rating Lock restrictions are set up or changed.

✎Program Rating Lock is not available in HDMI or Component mode.

✎The default PIN number of a new TV set is “0-0-0-0”.

■ Program Rating Lock: You can block rated TV Programs.

■ TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching.

■ MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which fi lms are appropriate for children.

■ Canadian English: You can block TV programs depending on their Anglophone Canadian.

■ Canadian French: You can block TV programs depending on their French Canadian rating.

■ Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

■ Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confi rm New PIN. When the Change PIN screen disappears, press the OK button. The TV has memorized your new PIN.

✎If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Language

Set the menu language.

✎Choose between English, Español and Français.

Game Mode

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

xIf you display the TV menu in Game Mode, the screen shakes slightly.

✎Game Mode is not available when the input source is set to TV.

✎After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality.

Caption

(On-Screen Text Messages)

■Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

✎The Caption feature does not work in Component or HDMI mode.

■Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels.

✎Service1~6 may not be available in digital caption mode depending on the broadcast.

■Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is Style 0.

Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan.

You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

✎Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode.

✎The Foreground and Background cannot be set to have the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎The Melody does not play.

xWhen no sound is output from the TV because the MUTE button has been pressed.

xWhen no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.

xWhen the TV is turned off by Sleep Timer function.

Auto Protection Time

■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain period of time defi ned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

- 5 -

- 6 -

- 7 -

- 8 -