27
Using the camera buttons to adjust the cameraThe RECORDING(AUTO, PROGRAM, A/S/M, MySET, VOICE RECORDING, MOVIE CLIP,
NIGHT SCENE , SCENE) mode function can be set up by using the camera buttons.
Used for turning the camera’s power on / off.
Slide the power switch to turn the power on
If there is no operation during the specified time, the
camera’s power will be turned off automatically to save
battery life. Slide the power switch and hold it for 3 seconds
to turn the power on without the ‘start’ sound.
POWER switch
Used for taking an image or recording voice in the
RECORDING mode.
In MOVIE CLIP mode : Pressing the shutter button down
fully starts the process for recording a movie clip. Press the
shutter button once and the movie clip is recorded for as long
as the available recording time in the memory allows. If you
wish to stop recording, press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the auto focus and checks the condition
of the flash.
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after the camera has finished
storing the image data.
SHUTTER button
Press the W/T buttons to browse between menu tabs in 5
steps while using a menu screen in the Program, A/S/M, or
MySET shooting modes.
If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.